How to Replace Front Lower Control Arm 2008-2013 Nissan Rogue скачать в хорошем качестве

How to Replace Front Lower Control Arm 2008-2013 Nissan Rogue

Shop TRQ on 1AAuto.com Control Arm with Ball Joint Set https://trq.video/ia-1ASFK02291 Control Arm with Ball Joint https://trq.video/ia-1ASLF01391 Control Arm with Ball Joint https://trq.video/ia-1ASLF01392 Shop TRQ on Amazon Control Arm with Ball Joint Set https://www.amazon.com/dp/B074MJ3ZX4 Control Arm with Ball Joint https://www.amazon.com/dp/B077J8RSP3 Control Arm with Ball Joint https://www.amazon.com/dp/B077JFS3GV This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2008-2013 Nissan Rogue. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This repair was done on a 2009 Nissan Rogue S 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2008 Nissan Rogue 2009 Nissan Rogue 2010 Nissan Rogue 2011 Nissan Rogue 2012 Nissan Rogue 2013 Nissan Rogue Tools you will need: • Pry Bar https://trq.video/oRI-1AXAA00020 • 18mm Wrench • 20mm Wrench • 18mm Socket • 21mm Socket • Pickle Fork • 1/2 Inch Impact Gun • Ratchet • Socket Driver • Socket Extensions • Torque Wrench https://trq.video/oaAw-1AXAA00044 • Gloves https://trq.video/oXA-1AXSS00048 • Safety Glasses • Chisel • Floor Jack • Hammer • Jack Stands • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Nissan Rogue 2008-13 1st Generation:    • Nissan Rogue 2008-13 1st Generation   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.