D-LINK Access Point/ Repeater Set-Up & SPEED скачать в хорошем качестве

D-LINK Access Point/ Repeater Set-Up & SPEED

D-LINK Access Point/ Repeater Set-Up & SPEED Step 1: Move the switch on the top of the DIR-505 to the Router/AP position, then plug it in to an available wall outlet. Verify that the power LED has turned green before continuing. Step 2: Connect to your network equipment: Connect the Ethernet cable which provides your Internet connection (ie: from your cable/DSL modem for Router Mode, or from your router for Access Point Mode) into the Ethernet port on the underside of the DIR-505. Step 3: From your laptop or mobile device, go to your Wireless Utility to display the available wireless networks and select the Wi-Fi name that is printed on the Wi-Fi Configuration Note in This information is also printed on the label on the base of the unit Step 4: Once you have established a connection between the DIR-505 and your computer or mobile device, open a web browser and enter http://dlinkrouter in the address field. Step 5: At the login page, enter the Administrator password in the Password field. If you have not changed the settings from the factory default, leave the Password field blank. Click Log In. Step 6: From the main page of the configuration interface, choose the Setup tap at the top of the page, and then click LAN Setup from the menu on the left-hand side. Step 7: Select Access Point or Router mode from the drop-down menu according to the required function. Use Access Point mode if you wish to use the DIR-505 to provide wireless access to an existing network, or select Router mode if you wish to create a private wireless network in order to share an Internet connection among wireless devices. For Access Point Mode: You can enter a personalized name for your device in the Device Name field. From the My LAN Connection is drop down menu, select the connection type which corresponds to your network connection type: Dynamic IP (DHCP) – Select this connection type if network automatically assigns your IP address information. You will not be required to enter any further information if you select this connection type. Static IP – Select this option if your network requires each device to have a specific IP address. Enter the desired IP Address, Subnet Mask, Gateway Address, Primary DNS Server, and Secondary DNS Server in the fields provided. Click Save Settings to save the current configuration. 🤟PLEASE SUBSCRIBE🤟 for more videos