How to Drain LELIT Anna скачать в хорошем качестве

How to Drain LELIT Anna

PL41TEM (LELIT Anna) Draining Instructions Here’s a summary of the steps to drain your PL41TEM Anna machine: 1) Turn off and unplug the machine: Ensure it’s powered off and unplugged before starting. 2) Release excess steam: IF your machine was turned on and at operating temperatures: open the steam wand if it’s hot to let out excess steam pressure. (This step can be skipped if the machine does not turn on) 3) Remove the water tank: Remove the water tubes and remove the tank. 4) Unscrew the top panel: Remove the two Phillips screws at the back of the top panel. 5) Lift and disconnect tubing: Pull the tubes through the small slot and remove the top panel. 6) Prepare the machine for draining: Wear gloves, disconnect the push-to-connect tube from the vibratory pump. 7) Drain the machine: Flip the machine upside down over a container and open the steam wand. If no water comes out, blow air into the steam wand to force the water out. 8) Reassemble: Once water stops draining, plug the tube back into the pump, reposition the top panel, and secure it with screws. That’s it! Your machine should be fully drained and ready to be packed away.