How to Replace Right Rear Upper Forward Control Arm 2008-2017 Buick Enclave скачать в хорошем качестве

How to Replace Right Rear Upper Forward Control Arm 2008-2017 Buick Enclave

Buy Now! New Control Arm Set from 1AAuto.com https://trq.video/ia-1ASFK04651 New Control Arm from 1AAuto.com https://trq.video/ia-1ASRU00089 This video shows you how to install new control arms in your 2008-2017 Buick Enclave. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle. This repair was done on a 2014 Buick Enclave Premium 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2008 Buick Enclave 2009 Buick Enclave 2010 Buick Enclave 2011 Buick Enclave 2012 Buick Enclave 2013 Buick Enclave 2014 Buick Enclave 2015 Buick Enclave 2016 Buick Enclave 2017 Buick Enclave Tools you will need: • 21mm wrench • 10mm Socket https://trq.video/obGK-1AXAA00017 • 21mm Socket • 22mm Socket https://trq.video/osb-1AXAA00266 • 1/2 Inch Ratchet • 1/4 Inch Ratchet https://trq.video/obGK-1AXAA00017 • 3/8 Inch Drive Ratchet https://trq.video/ob7a-1AXAA00015 • Torque Wrench https://trq.video/oba9-1AXAA00044 • Gloves https://trq.video/oa5c-1AXSS00048 • Marker / Writing Utensil • Safety Glasses • Floor Jack https://trq.video/oaxb-1AXAA00068 • Jack Stands https://trq.video/oajc-1AXAA00065 • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Buick Enclave 1st Generation 2008-17:    • Buick Enclave 1st Generation 2008-17   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.