Centurion D5 Evo Smart gate motor installation in Heidelberg by Pottie 083 778 2288 скачать в хорошем качестве

Centurion D5 Evo Smart gate motor installation in Heidelberg by Pottie 083 778 2288

Centurion D5 Evo Smart sliding gate motor installation in Heidelberg by Pottie 083 778 2288. Pottie from Exquisite Security is well known in the Centurion sliding gate motor installation market. With 20 years experience in the installations of all makes of gate motors, it is clear, that Pottie has seen and done it all. The knowledge Pottie has, with Centurion Smart sliding gate motors is huge. Pottie, is one installer who can and will repair/ service/ maintain any gate motor on site. There is no need, to remove a gate motor from site as all is done, on site. This includes, all models of Centurion sliding gate motors, Gemini sliding gate motors as well as the DTS range of sliding gate motors. The reason is that the listed gate motors above, parts are easily sourced. This client found Pottie on the web, and requested that Pottie perform a Centurion D5 Evo Smart sliding gate motor installation for him. This gate motor installation was conducted on 13 November 2024. 1st. The site was inspected, where and what was needed in order to perform the Centurion gate motor installation. 2nd. The concrete platform was cut off to assist in the installation of a steel base plate. A Hole is also cut in the steel platform which allowed the electrical supply cable to fit through. The steel platform was then welded into position and secured down completely with the needed steel round bar which are 12mm thick. 3rd. The Centurion Smart gate motor steel base plate was fitted with the Centurion anti theft bracket ears which are bolted on the inside of the gate motor base along with the gate motor steel base plate. 4th. The complete gate motor system was then test fitted into position, which allowed for the gate motor steel base plate to be spot welded into position. 5th. The gate motor specifications were checked and found to be right, this allowed one to weld the gate motor steel base plate down completely. The gate motor was then secured with all of its supplied steel bolts. 6th. The steel rack was then welded into position, according to factory specifications. The steel rack was also supported with steel brackets on the ends. 7th. The gate motor electrical wires were set in a trench which was dug out. The electrical wires were then connected, the gate motor battery was connected and double checked for correctness. The battery charging voltage was checked and found to be too low, to fully charge the battery. The battery charging voltage was set to 13.74 volts dc which is perfect for a lead acid gate motor battery 8th. The gate motor limits were set by using the Mycentsys pro app. 9th. The client was informed, what to do, and how to do things via the Mycentsys app. The site was handed over to the client. All installations are guaranteed, quality installations performed by the best Centurion D5 Evo Smart sliding gate motor installers in Gauteng. Customer satisfaction is guaranteed with all installations and repairs. Only the best original and new Centurion Smart gate motor parts are used to effect repairs. Our steel platform are specially made to the following sizes, 240mm x 350mm x4mm thick steel plates. For more information, please look here regarding gate motor installations in Heidelberg Gauteng here: https://www.exquisitesecurity.co.za/c... for more information, look here: https://www.exquisitesecurity.co.za/i... check out our new web page: https://www.smartgates.co.za more info: https://smartgates.co.za/installation...