Lidl Wing Glider скачать в хорошем качестве

Lidl Wing Glider

#lidlgliderconversion #lidlglider #StephenJonesRcAircraft Converting a lidl chuck glider into a Rc Slope Flying Wing. For a fast aerobatic Slope model. The Sparr is 6x6x920mm spruce hot glued into a slot to support the wing. I use cloth tape to cover the wing and give it extra strength starting from the rear of the wing. When one side was complete i slide the wing into the body and finished fitting the remaining Aileron and covered with tape . When finished Hot glued into position. Servos where fitted in the same way as my previous builds as was the radio gear. Ailerons to be controlled using a delta mix on the radio. GoG is 40mm from the leading edge And is very sensitive around that point as most flying wings are Test flight to follow.