Скачать с ютуб How to upgrade firmware patch on Zyxel ADSL routers в хорошем качестве

How to upgrade firmware patch on Zyxel ADSL routers

IMPORTANT NOTICE – PLEASE READ CAREFULLY: This procedure assumes the router is infected and requires you to perform a reset to factory defaults to clean any unauthorised setting changes made to the device by the malware. Before starting you will need to know your broadband settings to re-configure internet access. If you do not have this information, please contact your internet service provider. It’s critical all steps are followed for this procedure to work. IF your router can not access Internet, please refer to another video under this account, "How to share mobile 3G or 4G network", to share your mobile phone's 3G or 4G internet to your laptop. Step 1. Download the latest firmware with security fix. The above table (Table 1. Susceptible models) provides a download link for the latest firmware patches for the models affected. If your router has already been infected, you may experience problems accessing the internet and downloading the latest firmware. In this situation we recommend using the personal hotspot function on your mobile phone to share 3G/4G internet connection with you PC. Here is a useful link to setup and use this function on apple, android and windows based phones: Step 2. Remove DSL Cable from DSL port as illustrated below. Step 3. Reboot your router. Push in the black on/off button to turn off, wait 5 seconds then push the button again to turn on. The power light will flash whilst booting up and turn stable green colour when fully rebooted. Once the power light is stable and the device is fully rebooted move to the next step. Step 4. Reset router to factory defaults. Insert a paperclip into the reset hole until the power light and DSL light flash together. This takes around 10 seconds. When the lights flash together remove the paper clip and the router will reboot resetting to factory default state. Once the power light is stable move to the next step. Step 5. Firmware upgrade. a. Open web browser and type 192.168.1.1 (default IP) as show below. b. Login to the router with the default username/password admin/1234; you will need to enter a new password when prompted. After login go to “Maintenance”  “Firmware Upgrade” as shown below. c. Select firmware file, which you have downloaded in step 1. d. Select firmware and click on upload. e. Once you click on “Upload,” the router will start to upgrade the firmware and then reboot. Step 6. Reconnect DSL cable. Reconnect the DSL cable to the DSL port as shown below. Step 7. Reconfigure for Internet access Follow the instructions in the router Quick Installation Guide to reconfigure the router for Internet access.