Using Winlink with your FT-991A - set-up and demo скачать в хорошем качестве

Using Winlink with your FT-991A - set-up and demo

In short, Winlink allows you to send e-mails from your computer to any other computer without the need for an internet connection. Winlink is just another digital mode, not terribly different than any other, but the application and infrastructure is unique and surprisingly easy once you know how. Links: Winlink Main Page: https://winlink.org/ Winlink Express download: https://downloads.winlink.org/User%20... Amateur Radio Safety Foundation (ARSFI) Main Page: https://arsfi.org/ Register your key: https://arsfi.org/express.aspx RMS Live Map: https://winlink.org/RMSChannels?qt-li... Signalink USB Web-site: https://www.tigertronics.com/slusbmai... FT-991A Menu Settings 031 CAT RATE: 9600 (You can use any value – note the CAT RATE) 032 CAT TOT: 100ms 033 CAT RTS: Enable 062 Data Mode: OTHERS 064 OTHER DISP (SSB): 1500 Hz 065 OTHER SHIFT (SSB):1500 Hz 066 DATA LCUT FREQ: OFF 068 DATA HCUT FREQ: OFF 070 DATA IN SELECT: REAR 071 DATA PTT SELECT: RTS 072 DATA PORT SELECT: USB MODE: DATA -USB F (-LIST) WIDTH: 3200 METER: ALC RF PWR: 8-50W start low and work up. WIDTH: NAR/WIDE: W 3000 AGC: Auto NB-NOTCH-CONT-DNR-DNF: Off DT Gain: 6 ** IMPORTANT ** The DT Gain defaults to 50! This will overdrive the rigs modulator which will cause unwanted audio harmonics. Not good. Turn the DT Gain setting down to about 4, and start working your way back up, watching for ALC on the meter as well as the power out that you want. As you move the DT Gain setting back up (higher), you will see your power level increase as well as ALC levels. Find the happy medium of NO ALC showing on the meter. Excessive ALC indication is a sign that the audio drive is too high, and distortion is most likely happening. Chapters: 00:02 Introduction 00:41 The Winlink System Diagram 03:51 Downloading and Installing Winlink Express 04:59 Winlink Express initial settings 05:29 Getting your Winlink Express (optional) Registration code 06:26 Creating an eMail 07:03 Picking the ARDOP TNC and other options 07:57 FT-991A Menu Settings 09:30 Picking your Mode – DATA-USB 09:53 FT-991A Functions (F_M-List) Settings 11:30 Verifying your Port Settings (Device Driver) 13:26 Setting up Winlink Express and ARDOP TNC 16:63 Demo – Sending eMails 19:58 Demo – Receiving eMails 20:33 Summary 21:18 Invite to Write 21:24 End Notes Thanks for Watching – Please remember to Like, Share, Comment, and Subscribe 73 de Tom, ND3N