How to Operate an ASTROAI Tire Air Inflator Compressor Pump on Car Flat (PSI Use Instructions Amazon скачать в хорошем качестве

How to Operate an ASTROAI Tire Air Inflator Compressor Pump on Car Flat (PSI Use Instructions Amazon

Here’s a step-by-step guide on how to use an Astro AI digital tire inflator (whether you bought it from Amazon or Home Depot, the process is the same): 1. Prepare your inflator Park your car on a flat surface. Turn the ignition off. Locate your tire’s recommended pressure (check the driver’s door sticker or owner’s manual). 2. Power the inflater 12V car version: Plug the inflator’s DC plug into your vehicle’s 12V cigarette lighter socket. AC/cordless version: Plug into a wall outlet or make sure the battery is charged. 3. Connect the air hose Remove the tire’s valve cap. Attach the inflator nozzle to the valve stem and press the lever/lock to secure it. You should hear a brief hiss of air — that’s normal. 4. Select the pressure unit Press the UNIT button to choose PSI, KPA, BAR, or KG/CM² (most people in the U.S. use PSI). 5. Set your target pressure Use the “+” or “-” buttons to set the desired PSI. Example: If your sticker says 35 PSI, set 35. 6. Start inflating Press the power button to start. The inflator will run until it reaches the set pressure, then automatically stop. 7. Disconnect and check Unlock the nozzle and remove it quickly to avoid losing air. Replace the valve cap. Repeat for the other tires if needed. #tireinflator Disclaimer: As an Amazon Associate I earn from qualified purchases.