How To Fix a Bubbled RV Wall. Delaminated Fiberglass RV Siding caused by a cracked marker light. скачать в хорошем качестве

How To Fix a Bubbled RV Wall. Delaminated Fiberglass RV Siding caused by a cracked marker light.

A small crack in a marker light led to big problems on this motohome. The seal around the marker light failed and resulted is leak where water got in and delaminated the wall. This video shows you how the wall was repaired. It includes information on styrofoam safe epoxy from Composet Products L.L.C. Learn how the pro's handled this project. Then use the Do It Yourself repair kit to get expert results! The cost of repairing water damaged RV siding can be very high. But there is a good DIY fix. Repairing a delaminated RV wall can be a daunting task. The best way is turn it over to an RV dealer and have them replace the entire sidewall. However, the cost can run into the tens of thousands of dollars. For many RV owners spending this much money does not make sense, or is not practical. But there is an option- repairing the delaminated wall using a do-it-yourself RV Delmaination Repair Kit. We have become familiar with just such a kit produced by Composet Products L.L.C. Their kits have the well respected RV specific Composet SLV™ epoxy resin system. While their are a number of general purpose epoxies on the market, in our experience and opinion Composet SLV™ is the right choice that gives you the best chance of a successful repair...and has a proven track record in RV wall repair. Return to: Siding & Wall pageLegal and Privacy StatementMany of the calls we receive from RV owners start with something along the lines of, “…my fiberglass RV has a bubble on the side…” While there is some validity to the statement, including the fact the owner is dealing with a serious problem, therein also exists a misnomer. While the majority of motorhomes and campers are manufactured with a thin layer of fiberglass sheeting, technically called Fiberglass Reinforced Plastic (FRP) it is only a small fraction of the overall construction. In general, most pleasure boats, including runabouts, wake boats, ski boats, and sail boats are made from fiberglass, but most RVs are not. To make a fiberglass boat, chopped fiberglass strands are combined with polyester resin (different than epoxy) to create a structure that forms the hull and deck. The wall thickness of the hull and deck are relatively large compared to FRP, and capable of structural support of engines, masts, and running gear. Metal and wood can be imbedded in the fiberglass to strengthen specific areas, or to create mounting points. RVs and camping trailers on the other hand have a steel frame supporting the running gear, onto which a wood, aluminum, or steel stick frame is mounted. The stick frame is infilled with insulation and skinned with layers of plywood, and finally a thin fiberglass sheet (FRP) is bonded to the outside to form the exterior finish or siding. It makes sense that many people therefore consider it a “fiberglass RV”, as the fiberglass is the most prominent visible feature. The RV wall is really a composite structure, and fixing water damaged RV walls is therefore not “a fiberglass repair job” as one might fix a damaged boat or Corvette body. Products such as boat repair resins, fiberglass repair kits, or autobody filler are usually not the right choice for fixing wavy and delaminated campers and motorhomes. This is one reason why RV repair shops shy away from making repairs to water damaged walls. They are good at fixing awnings, heaters, and refrigerators, but may lack an understanding of structural bonding and composite repair processes. While damage may be so severe that repairs are not an option, many times delamination can be addressed with simple tools, moderate skills, and the right materials.