Jeep Wrangler JK JKU Pinion Bearing Removal and Replacement - It's a Jeep World (DIY) скачать в хорошем качестве

Jeep Wrangler JK JKU Pinion Bearing Removal and Replacement - It's a Jeep World (DIY)

Don't forget to Subscribe to this Channel and Be on the look out for more basic and advanced Do it yourself videos in the near future. Jeep Wrangler JK JKU Pinion Bearing Removal and Replacement Refer to JK_JKU Hub Bearing Replacement video for more detailed instructions on removal and Installation of the Hub Bearing and Axle Shaft.    • Jeep Wrangler JK / JKU Hub Bearing removal...   Tool Suggested: 1/2" Drive Ratchet 1/2" Drive Breaker Bar 1/2" Drive Torque Wrench capable of 120 ft lbs 3/8" Drive Ratchet 1/4" Drive Inch lb Torque Wrench 29mm or 1 1/8" Socket 21mm Socket 21mm Wrench 16mm Socket 13mm 12 point socket 14mm socket 5mm Hex Wrench (Allen Wrench) 3-5lb Hammer Various Breaker bars Various Punches Seal/Race installer Kit Bearing Remover Hydraulic Press New Bearing Pre-Load 12-15 Inch Lbs as reported by Yukon Gear and Axle Bearing Caps Torqued to 60 Ft lbs Pinon Bearing Kit used from AutoZone Motive Gear- Part Number: R30RJKPK Approx: $80