2013 Infiniti QX - Automatic Drive Positioner (if so equipped) скачать в хорошем качестве

2013 Infiniti QX - Automatic Drive Positioner (if so equipped)

If your vehicle is equipped with the Automatic Drive Positioner feature, it is located on the driver's side door. With the automatic drive positioner, you are able to set and store two separate positions of the driver's seat, steering column, and outside mirrors. To do so, follow these steps: First, set the shift selector to the P, or Park, position. Then, place the ignition in the ON position. Third, adjust the driver's seat, steering column, and outside mirrors to the desired positions by manually operating each adjusting switch. Next, push the SET switch and, within five seconds, push the memory switch one or two, for at least one second. The indicator light for the pushed memory switch will come on and stay on for about five seconds to let you know it is stored. The previous memory will be deleted when the new setting is stored. Repeat this procedure for the second driver position. You can also link the stored memory position to a key fob. First, create a stored memory position. Then, during the final step when the indicator light for the memory switch being set is illuminated for 5 seconds, press the unlock button on the key fob. For a second driver, repeat this procedure using the other key fob. If your vehicle is equipped with the Entry / Exit Function, The driver's seat will slide backward and the steering wheel will move up when the driver's door is opened, with the ignition switch in the LOCK position. The driver's seat and steering wheel will return to the previous positions when one of the following is operated: • When the ignition switch is pushed to the ACC position after the driver's door is closed, or • When the ignition switch is pushed to the ON position. The Setting Memory Function links your air conditioning, navigation and audio systems to each Intelligent Key, and remembers each setting. To use this function, lock the doors with the Intelligent Key that is linked to the settings. To enable it, have the Intelligent Key with you and unlock the doors by pushing the driver's door handle request switch or the UNLOCK button on the Intelligent Key. Then, push the ignition switch to the ON position. The words "Connection with the key has been done" will be displayed on the screen and the settings that were programmed are available.