VARGO Titanium Hexagon Wood Stove used with a Mini - Trangia - Boil Test #3 скачать в хорошем качестве

VARGO Titanium Hexagon Wood Stove used with a Mini - Trangia - Boil Test #3

On my last video I did a boil test with the VARGO Titanium Hexagon Wood Stove where I left the door open as per suggestion from a couple of viewer. This was becuase the Trangia burner was blocking the vent holes on the bottom of the VARGO Titanium Hexagon Wood Stove and it looked like the burner didn't get enough air. The flame was all yellow. In the video I use an Evernew Titanium Cross Stand to raise the Trangia burner off of the vent holes plus this would shorten the distance between the top of the burner to the bottom of the pot. With the Trangia burner sitting on the bottom of the stove the distance is about 2 inches. We've found in the past that the distance should be closer to 1 inch. Not to give away the video but it didn't work so well. The test gave an even longer boil time than the last test. Oh well, back to the drawing board. Thank you for watching my video, Hiram Lab0298 Title: VARGO Titanium Hexagon Wood Stove used with a Mini - Trangia - Boil Test #3 Room temp: 79° Humidity: 48% Weather condition: Partly Cloudy Burner: Mini - Trangia #2 Stove/Pot stand: VARGO Titanium Hexagon Wood Stove Pot: Boy Scout Pot 2 Fuel: Methanol Amount of fuel at start: 2/3 full Amount of fuel consumed: 17.23 grams or less than 3/4 of a fluid ounce Amount of water: 2 cup(s) Water temp at start: 61° Time to boil: 8 minute(s) 35 second(s) Time to run-out: NA Note: This test was run with the Evernew Titanium Cross Stand to raise the Trangia burner. NA = Not Applicable / Not Available