Wolf Warrior Pro+ 60v (old model) FT85BD esc and LCD screen. скачать в хорошем качестве

Wolf Warrior Pro+ 60v (old model) FT85BD esc and LCD screen.

Gday all. since we have days off for this rain depression they are calling a cyclone, i finally had the time to solder up and feed through the cables for the LCD display for the FT85BD non vesc esc from flipsky, (supplied cables are individual and end up being too messy on a scooter. had to use my own 4 core, keep that in mind) the LCD has built in GPS for speed but i find it a little laggy, i use wheel diameter 255 and 15 pole pairs and no gps to get wheel speed readings. still have no idea how the lights and brake lights work direct from the esc itself as it still seems as tho the UART vx4 remote is required to have running lights. i have instead used an ADC breakout board that gives me lights, horn, brake, indicators, and the ability to run dual/ single motor via the adc signals themselves, ie no canbus, (adc breakout board takes ADC input and splits the signal with some amplifying to maintain good values.) ive yet to set my rear motor up to how i want it and the front motor ive left at its detected IPDS settings. I must say, this esc has put up with more mishaps and abuse than the vesc 75100 v2 that i ran on the ebmx.. fried that when i had a battery disconnect and i was on the regen brake coming down hill. Looking forward to more features and the ability to use the lights outputs direct via adc switches.