У нас вы можете посмотреть бесплатно Programming Remote for your Lewmar Axis Shallow Water Anchors или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
This has been one of the most popular questions. Programming your Lewmar Axis Remote. Clear Remote Settings then program Momentary Mode: Step 1: Press and hold the programming button for 3-5 seconds. When the light turns on wait until it flashes and turns off. Step 2: Press and hold the programming button for 3-5 seconds. While light is solid press UP on the remote. (Don't Touch anything!) The Remote will flash and the control box will flash. ** Steps Direct from Lewmar Support ** Momentary Setting: Press the program button until the light comes on, then count for five seconds, then release the button. (This step deletes any programming in the RF module.) Press the program button until the light comes on, then release the button. Press the remote arrow button once. (Any direction) The program light will blink once and return to red. Wait for the program light to rapidly blink three times and turn off. The RF module is now in momentary mode. Latching setting: Press the program button until the light comes on, then count for five seconds, then release the button. (This step deletes any programming in the RF module.) Press the program button until the light comes on, then release the button. Press the remote button once. (Any direction) The program light will blink once and return to red. Press the remote button a second time. The program light will rapidly blink three times and return to red. Wait for the program light to rapidly blink three times and turn off. The RF module is now in latching mode. I have not figured out how to change between momentary and latching mode. This will be my next video! Hope this helps! More to come! -Mitz 00:00 Intro 00:21 Models 00:45 Current Setup 01:00 Clear Remote Settings 01:32 Program SWA Box 1 02:02 Swap Power to Boxes 02:16 Program SWA Box 2 02:28 Testing SWA 2 02:34 Supply power to both SWA Boxes 02:40 Testing Both Shallow Water Anchors