How to Change Transmission Oil in your Malibu Skier's Borg-Warner Velvet Drive Marine Gear скачать в хорошем качестве

How to Change Transmission Oil in your Malibu Skier's Borg-Warner Velvet Drive Marine Gear

https://repairs101.ca/how-to-change-t... Changing transmission fluid (Dextron iii) in a Malibu Skier's Borg-Warner Velvet Drive 1:1 output marine gearbox. Demonstrates tools used to recover old oil and a pro tip on what to do if you can't find a clean funnel to refill the gear case with. #boats #transmission #oilchange Transcript provided for the hearing impaired: Alright today on Repairs101 I’m going to help a friend out by changing the transmission fluid in his boat’s Borg-Warner Velvet Drive marine gear. The Malibu Skier is a fairly common boat here and the Velvet Drive is definitely one of the most common marine gearboxes – anywhere. By far the most common question I’m asked as a mechanic is what kind of oil to use. Velvet Drive transmissions will operate with any number of different fluids but use Dextron III for it’s resistance to oxidization and thermal degradation. If you feel around underneath you’ll notice there’s no drain plug and even if there was you wouldn’t be able to get a tray underneath to collect the used oil. Never drop the oil into the bilge of your boat. Use a suction pump and a recovery jug to collect the used oil for recycling. Here you can see I forgot to bring a funnel with me so I just cut one out of the corner of a plastic bag. If you don’t have the owner’s manual or access to the service manual and an internet search doesn’t yield the fluid capacity just pour slowly and check often. The best part of being a marine mechanic is going out for sea trials. After ten or fifteen minutes shut her down and check your levels again. Alright thanks for watching and don’t forget to subscribe!