Rosemary distillation on backyard - essential oil and hydrosol скачать в хорошем качестве

Rosemary distillation on backyard - essential oil and hydrosol

🆓Get 5% OFF your order Today: https://copper-pro.com/discount/youtu... 🏷️Use special promocode: youtube5off 1.Fill the boiler with water up to 80% of its volume.The water should be pure and drinkable. 2. Fill the column with raw material. Leave enough space if hard raw material like rosemary are used. It can increase its volume by 20% of initial size. If loose herbs and petals are used for extraction (like Sage. Melisa, Rose) you can press it a little bit to put more material. 3. • Close the column with the sieve. 4. Put the silicone gasket into the rim of the boiler, and attach the column with the clamp. 5. • Connect the still with your water system. (you can use ice to cool the water in the bucket, make sure that the water in the bucket does not heat up and the condenser has time to cool). Use tap adapter instead of aerator or you can use a water pump for cooling. Connect the adapter for the water pump with the pump and the hose provided. Connect other end of the same hose with the tube 4 (see image on page 4). Fill a bucket with cold water (at least 12 L of water) and put it on the table near the cooker. Put other hose on the tube 5 in the upper part of the condenser. Put other end of the hose into the bucket. Fix the hose in such a way so that it will not be able to get out of the bucket during distillation process. 6.Put a vessel below the copper tube of the separator to collect the hydrosol. Switch on the cooker and wait for the first drops of the best hydrosol and essential oil of home quality. Open a tab water for cooling the system.You will receive essential oils after 20-30 minutes of distillation, after which you will be able to receive only hydrosol Our tips: • It is recommended to use approx. 0,5 kg of the raw material for obtaining1 L of hydrosol. Depending on the quality of the hydrosol you can increase or decrease the quantity of raw material for 1 L of hydrosol obtaining. • If you want to get essential oils then you need to use an essential oil separator, but you do not need a separator for hydrosol distillation but it is preferable to use a funnel with a cotton disc to filter hydrosol or you can filter at the end of the distillation. • Change the container for collecting the hydrosol every 30 minutes, the hydrosol that you get from the first container will have a strong and rich smell, the hydrosol in the second container will have a less strong smell, etc. At the end of the distillation, you decide whether to mix the hydrosols from different containers or leave and use like this • Prevent the temperatures of distillate coming out of the condenser from rising above 35 °C. (a thermometer will help you with this, it is in all our kits, except for the basic set) if you are using a pump, then you need to make sure that the water in the bucket stays cold, you can use regular or dry ice for cooling You can purchase the equipment for distillation essential oils and hydrosol on our website: You can save 10% if you use the coupon before the end of this month - copper10off https://copper-pro.com/product/essent...