DIY Modifying an aluminum dipstick handle to fit the OEM oil dip stick, by hand fitting скачать в хорошем качестве

DIY Modifying an aluminum dipstick handle to fit the OEM oil dip stick, by hand fitting

You can use this thought process for any handle retrofit. In this video I take a $12 Aluminum oil dip stick handle I got on eBay (BEVINSEE Aluminum Engine Oil Dipstick Handle For BMW E46 E39 Z4 M52TU M54) and modified it for the 2006 Scion tC. There are no "upgrades" made for the Scion so this is a custom mod, and custom fit. Full DIY writeup available here: https://g1tc.com/blog/f/custom-fitted... List of hand tools used: You'll need a wide array of hand tools here, assuming you don't work at a machine shop. Here's everything I used: Bench Grinder Table Vise Hand files (large and small) Dremmel with metal cutting disc Sand paper Power drill Digital Calipers Drill bits, I use Stroton drill bits, in metric. I used 3.5mm and 2mm. Rubber washer, painters tape, scrap leather Doorman Roll pin assorted pack p/n 13850 (you will use the 5/64" roll pin) Starter punch Roll pin hammer (small hammer for roll pins)   / gen1scion   Thanks for watching!