Using LaserWeb with the LaserPecker L1/L1Pro скачать в хорошем качестве

Using LaserWeb with the LaserPecker L1/L1Pro

This is a demo which shows you how to set up the free LaserWeb software (https://github.com/LaserWeb/LaserWeb4...) for use with the LaserPecker L1/L1Pro engravers. This demo walks you through setting up LaserWeb, creating a gcode file, using dropbox to transfer it to your iphone, then transfer it from dropbox to the correct folder on your iphone so you can load it in the LaserPecker App. Here's an index: 00:00 Configure Laserweb with the following setup: Settings----Machine: Dimensions 100x100 Origin Offsets (important!) X: -50, Y: -50 Tool head: 0.15 (if L1Pro, 0.3 otherwise) Settings----GCODE : GCODE Generator: Marlin GCODE START: M05 S0 G90 G21 G1 F2000 G4 P0 GCODE END: M05 S0 G1 F2000 G1 X0 Y0 TOOL ON: G4 P0 M03 TOOL OFF: G4 P0 M05 S0 G1 F2000 LASER INTENSITY: S (save the profile) 05:37 Load a document into LaserWeb, set parameters, save gcode file 12:12 Open up the gcode file in notepad. Replace G0 with G1 (IMPORTANT!) 13:00 Upload gcode file to dropbox for transfer to your iphone 13:56 Download file from dropbox, save in the correct folder on your iphone to have it show up in the LaserPecker Application 15:00 Load the gcode file into LaserPecker and etch! I hope this helps! Dave