Скачать с ютуб Hyper Tough Hammer Drill Reviewed. Hyper Tough Brushless Hammer Drill is reviewed in detail. в хорошем качестве

Hyper Tough Hammer Drill Reviewed. Hyper Tough Brushless Hammer Drill is reviewed in detail.

Detailed review of the Hyper Tough Brushless Hammer Drill. Detailed review of the Hyper Tough Hammer drill along with a detailed demonstration of how it works. This is the best drill we ever tested in the under $50 category. The price is based the cost of the drill, battery and charger being under $50. In other words, the best cheap drill we ever tested. The drill is a 20 Volt Drill from Walmart. The 20 Volt Brushless Hammer drill is made for both masonry and normal day to day use. We review several key specification of the Hyper Tough Hammer drill. We review the cost and what is included in the box. We note that the Hyper Tough Brushless Hammer drill is more powerful than the standard Hyper Tough Brushless Drill. We note the Torque of the Hyper Tough Brushless Hammer drill is 400 In-lbs versus the standard drill's 250 in-lbs. We review the 3 basic modes of the drill which include hammer mode,drill mode and drive mode which is also called screw mode. We note the drill has a two speed transmission with low speed with high torque and high speed with low torque. The chuck on the Hyper Tough Brushless Hammer Drill is metal and is a ratchet style. Then we review the light with delayed off as well as the forward and reverse switch on the drill. We show how to remove the standard Hyper Tough 20 volt battery from the drill. We point out how a brushless motor is better than a brushed motor in terms of run time, power, and motor life. We point out the bit storage on the drill and the belt clip. We then perform the following tests with the Hyper Tough Hammer Drill: Test driving in decking screws with the Hyper Tough Hammer Drill. Test driving in 0.25 inch lag bolts with the Hyper Tough Hammer Drill. Test driving in 0.33 inch lag bolts with the Hyper Tough Hammer Drill. Test drilling a hole with a 1/2 inch split point bit with the Hyper Tough Hammer Drill. Test drilling a hole with a 7/8 inch spade bit with the Hyper Tough Hammer Drill. Test drilling a hole with a 1 inch speed bit with the Hyper Tough Hammer Drill. Test drilling a hole with a 1.25 inch speed bit with the Hyper Tough Hammer Drill. Test drilling a hole with a 3/8 masonry bit with the Hyper Tough Hammer Drill. We compare drilling a hole into a brick with a hammer drill vs a normal drill. From all the testing we can see how important the two gears are on the Hyper Tough Hammer Drill which is also known as the Hyper Tough Brushless Hammer Drill I note how much better the metal chuck on this drill feels than the plastic chuck on the non-hammer drill. Then I give my conclusions about the Hyper Tough Brushless Hammer Drill. Chapters: 00:00 Welcome and Overview of the Hyper Tough Brushless Hammer Drill 00:40 How does the Hyper Tough Brushless Hammer Drill compare to the non-hammer Drill 01:18 Basic Functions and Features of the Hyper Tough Brushless Hammer Drill 03:17 Hyper Tough Hammer Drill: Tested with Decking Screws 04:38 Hyper Tough Hammer Drill: Tested with 1/4 Inch Lag Bolts 05:40 Hyper Tough Hammer Drill: Tested with 1/3 Inch Lag Bolts 06:56 Hyper Tough Hammer Drill:Tested with a 1/2 inch Split Point Bit 08:12 Hyper Tough Hammer Drill:Tested with a 7/8 inch Spade Bit 09:00 Hyper Tough Hammer Drill:Tested with a 1 inch Speed Bit 10:28 Hyper Tough Hammer Drill:Tested with a 1.25 inch Speed Bit 12:37 Hammer Drill vs Normal Drill 13:18 Hyper Tough Hammer Drill:Tested with a masonry bit 14:52 Conclusions about the Hyper Tough Brushless Hammer Drill #hypertough #brushless #hammerdrill #cheaptools #walmart #drills #toolreviews #powertools This video applies to Hyper Tough 80045 and Hyper Tough Model 80045 and all similar models with identical specifications.