Preparing a Slope for Bathroom Floor and Shower Areas (HINT: DON'T USE CEMENT!) скачать в хорошем качестве

Preparing a Slope for Bathroom Floor and Shower Areas (HINT: DON'T USE CEMENT!)

Bathroom floor preparation and floor design installation is tricky. Aside from the waterproofing aspect, you also have to deal with the preparation of the concrete floor elevation or slope. Your waterproofing system is not always enough. Sometimes, you need to correct the elevation or slope of the bathroom or shower floor before the bathroom floor tile installation or floor coating application. The bathroom or shower floor should be sloped into the direction of the drain. You have to consider the slope or elevation of your bathroom floor area to prevent water from accumulating on the surface, which could damage the waterproofing system installed on your bathroom floor. You have to consider the depth of the bathroom floor that needs correcting. If the bathroom or shower floor requires a minimum thickness of 10mm, a sand-cement mix is not recommended because it cannot meet the required compressive strength for such situations. It will just delaminate over a short period of time. With this, we recommend using a repair mortar that can achieve up to 3500 PSI at a minimum thickness of 10mm. This is more ideal when creating a slope for your bathroom floor compared to using sand-cement mix or the thick bed method. In this video, we're going to teach you the proper method of creating a slope to drain for your bathroom floor area to avoid common leaks, flooding problems, and the right products to use to prevent concrete delamination. If you are interested in our product, you can visit our website at www.magnaprime.com.ph or click the link below: http://www.magnaprime.com.ph/buildrit... Hardcrete 310 is available at Lazada, Shopee, and the leading hardware stores and depots.