Emax Tinyhawk 2 II RTF / BNF Instruction Manual скачать в хорошем качестве

Emax Tinyhawk 2 II RTF / BNF Instruction Manual

v2.2.pdf modified on: Fri, May 1, 2020 at 4:22 PM TinyHawk II RTF - Manual https://drive.google.com/open?id=1Fwh... TinyHawk II RTF - Firmware Use target MatekF411RX version 4.1.0. If you are using an older E6 Transmitter and are having trouble binding, please use the following custom version of MatekF411RX 4.1.0: https://drive.google.com/open?id=1ziL... TinyHawk II RTF - CLI https://drive.google.com/open?id=1DR0... TinyHawk II BNF - Manual https://drive.google.com/open?id=1Mpp... TinyHawk II BNF - Firmware Use target MatekF411RX version 4.1.0. If you are using an older E6 Transmitter and are having trouble binding, please use the following custom version of MatekF411RX 4.1.0: https://drive.google.com/open?id=1ziL... TinyHawk II BNF - CLI https://drive.google.com/open?id=1Up8... DETAILED INSTRUCTIONS 1. Download/Install Betaflight Configurator 10.6 https://github.com/betaflight/betafli... For full compatibility with the firmware on your drone, do NOT use other versions of Configurator. 2. Connecting Drone Connect the drone to computer via USB data cable (some are power/charging only). Open Betaflight Configurator by clicking Connect. (Don't worry about which COM port number your computer chooses for you.) 3a. Flash Stock Firmware (OPTION 1 - Should work for most setups.) Click the Update Firmware button in Configurator, and select MatekF411RX (MTKS) target version 4.1.0 from the drop-down menus. Then click Load Firmware [Online]. Click Flash Firmware. (If you encounter some error: please unplug the USB cable, plug it back in, and then click Flash Firmware again.) *Important: After reconnecting to the Configurator, there will be a pop-up Notice window that asks if you want to apply the custom defaults for this board. Please select Apply Custom Defaults. 3b. Flash Custom Firmware (OPTION 2 - Try this if using an older generation E6 Transmitter and first method cannot bind.) Download custom MatekF411RX 4.1.0 firmware (filename "EMAX_Custom_Betaflight_4.1.0_MATEKF411RX.hex") and save it to your desktop. https://drive.google.com/open?id=1ziL... Connect drone to computer via USB data cable (some are power/charging only). Open Betaflight Configurator. Click Update Firmware. Click Load Firmware [Local]. Select the firmware you downloaded. Click Flash Firmware. (If you encounter some error: please unplug the USB cable, plug it back in, and then click Flash Firmware again.) *Important: After reconnecting to the Configurator, there will NOT be a pop-up Notice window that asks if you want to apply the custom defaults for this board. Rather, you will need to go into the Setup tab and click the Reset Settings button, and then click the Reset button in the corresponding pop-up window. Re-Connect to Configurator. 4. CLI Settings Open the CLI dump linked below. You can also download/save the text file to your desktop. Select/highlight all of the text within the document and "copy" it (i.e. right-click the highlighted text and select "copy" from your computer's menu). TinyHawk II CLI MATEKF411RX (MTKS) 4.1.0 BNF (Generally the one to use, especially with your own FrSky D8 transmitter) https://drive.google.com/open?id=1Up8... TinyHawk II CLI MATEKF411RX (MTKS) 4.1.0 RTF (For use with the E6 transmitter from the RTF bundle) https://drive.google.com/open?id=1DR0... Click the CLI tab in the left-hand column. Right-click on the command line (e.g. "Write your command here"), and select "paste" from your computer's menu. Then press "enter" on your keyboard. The settings should load and save. (Don't worry if you get some kind of serial device error, as it's a known bug which doesn't affect anything.) Disconnect your drone from the USB cable. *Important: After using the custom hex/firmware from step 3b, please disregard the CLI errors. Please manually type in "save" (no quotation marks) and press Enter on your keyboard. 5. Binding Drone Standard Method - Plug a charged lipo battery to the drone. The next step is easier if the battery is hanging free, out of the battery mount. Using a non-metallic object (or even just pushing/flexing the battery mount), hold the Bind button on the bottom of the main board for several seconds. Bind your radio transmitter in D8 mode. Keep the transmitter at least 5 feet away from the drone to allow for proper binding. Unplug the lipo battery from the drone. Turn off the transmitter. *** Please note that the TinyHawk II is only specified for use on D8. However, you may choose to use the following if forced to bind in D16......... https://emaxusa2.freshdesk.com/suppor...