Ventilation in Poultry Farm: Tune-Up Before the Warm Months! скачать в хорошем качестве

Ventilation in Poultry Farm: Tune-Up Before the Warm Months!

Prepare for the summer heat by tuning up your ventilation system now! Here are some ventilation in poultry farm maintenance tips, specifically for fans and cool cells. https://www.southlandorganics.com/blo... Fans could basically be considered as the heart of mechanical ventilation. The fan is going to pump the "blood," or the air, in your house's air exchange. So how can you make sure that it's doing what it's supposed to do? Number one, check those belts. I know we harp on that a lot. In fact, we did a video in 2022 about belts and pulleys. Over time, belts will also get thin and worn. And, when they start going down into the pulley, you can lose as much as twenty five percent of airflow by having that pulley reduced. Now if you take that twenty five percent multiplied by six fans in the back of the house, you really only have the power of about four and a half fans. It's as if you're losing a fan and a half! Would you cut off two fans during the heat, the hot part of the summer? No. So make sure that belt is riding up high on that pulley. It's also good to keep a few spare belts around for that for that very reason too. This can help prevent you from losing that high speed we like to see in poultry house fans. Your pulleys are also a crucial part of your ventilation system. If the pulley starts wearing out, that belt's going to drop down in there. That pulley should have a 'V' shape. What will happen is that the pulleys will wear down to where they're making a 'U' shape instead. And, when that starts riding down in there, you start losing some of the power of the fan turning, which means you're going to lose some air flow. So make sure your pulleys have a good 'V' shape and are not too worn. Alignment is another thing that can wear out those belts. Misalignment can come with just a motor getting loose or your pulleys getting loose. Pulley misalignment will cause the belt to wear out faster. So, make sure your belts are riding where they should. Make sure your pulleys are lined up.Make sure that they've got a good 'V' shape cut into them. Now, if we're talking about air flow, the last two things are going to be keeping your shutters, air inlets and blades clean. To continue with the illustration of heart and blood, not cleaning the shutters and the screens that go on the outside of that fan is like getting getting your arteries clogged. If they're dirty, your shutters and inlet openings will not open as well. Then you're restricting air flow and air mixing. So, keep your shutters clean, and get in there and clean your fan blades too. The fans are responsible for bringing that air in to cool cells. We we can't put air conditioners in the in the chicken house. Right? So the cool cells are your air conditioner. You've got to take care of cool cells, because as much as the fan is responsible for the flow of the air, they are responsible for the flow of the water. Number one, make sure that your cool cells are actually clean and there's no build up. Is there anything that's going to restrict the flow in there? So, you've got to clean these and get mineral deposits and bacteria off of them. Now, you can pressure wash cool cells, but there's one thing to make sure of if you do so. Cool cells are at an angle. So, you kind of want to shoot at an angle when pressure washing. You should also consider what's providing water to these cool cells. So, you've got your pipe, you've got your pumps. You want to make sure those are clean. The way you can tell whether or not that water is getting where it's supposed to is by looking at the cell when it first cuts on. Are you seeing certain spots that are dry on the cool cell? When water drips down from the flute, is it covering all of the cool seal? Is all the cool seal getting completely wet? If you have some areas where the water is not flowing, you may have a hole that's clogged up. It may be that your sumps haven't been cleaned out and they're getting trash up in there. And now your water's not flowing properly. To help fix this, make sure your pumps are doing what they're supposed to do. Keep the water line clean so you can have a good surface cover of that cool cell, because if you're not pulling air through that wet part of the cool seal, you're just restricting air flow. You're not getting the maximum cool that could be coming through. Check your belts, your pulleys, clean the shutters, clean the fans. Are your cool cells getting adequate water flow over them so that they can cool your poultry barns as much as possible? Whether you use tunnel ventilation, mechanical ventilation, stir fans or other systems, ensure even your minimum ventilation provides sufficient wind speed to keep your birds cool and healthy. Heat stress can cause a host of issues in a flock—remember that a happy bird is a healthy bird, and a healthy bird is a profitable bird!