How to Update Polyscope on Universal Robots? скачать в хорошем качестве

How to Update Polyscope on Universal Robots?

1. Check Current Version. Check Current Version On the teach pendant, go to → "settings" → "About" and note your current software version. 2. Download Software Get the latest version here: ➡️ https://www.universal-robots.com/down...[]=98763&query= ⚠️ If your robot is running PolyScope version 5.5.1 or below, visit https://www.universal-robots.com/arti... 3. Prepare USB Stick Save the update file on a USB (FAT32 format). 4. Plug In USB Insert the USB stick into the controller box. 5. Start the Update On the teach pendant: → Go to Settings → Select System → Press Update → Choose the software file → Press Install Software 6. Let the Robot Reboot The robot will automatically power off and on. ⚠️ 𝗗𝗼 𝗻𝗼𝘁 𝘂𝗻𝗽𝗹𝘂𝗴 𝗼𝗿 𝗽𝗼𝘄𝗲𝗿 𝗼𝗳𝗳 𝗱𝘂𝗿𝗶𝗻𝗴 𝘁𝗵𝗶𝘀 𝘀𝘁𝗲𝗽. 7. Complete Firmware Update Go to Initialize tab and press ON. If needed, the joint firmware will update at this point. 8. Remove USB After the update is complete, safely remove the USB stick. 7. Repeat if Needed If you're doing incremental updates, repeat steps 4–8 until the latest version is installed. Note: From version 5.5 and up, you can skip incrementals and go straight to the latest version. ⚠️ Important: Always power the robot ON after each update to complete the process before moving to the next. On the teach pendant, go to → "settings" → "About" and note your current software version.