BRITISH SCAFFOLDING STANDARD | BSEN 12810-1:2003 | PART-1: PRODUCT SPECIFICATIONS | FULL DETAILS | скачать в хорошем качестве

BRITISH SCAFFOLDING STANDARD | BSEN 12810-1:2003 | PART-1: PRODUCT SPECIFICATIONS | FULL DETAILS |

***BS EN 12810-1:2003-Façade scaffolds made of prefabricated components*** पूर्वनिर्मित घटकों से बने अग्रभाग मचान Part 1: Products specifications उत्पाद विनिर्देश 1. Scope • This European Standard specifies the performance requirements and the general requirements for structural design and assessment for prefabricated façade scaffold systems. The façade scaffolds are intended for use while connected to the façade with ties. • It is limited to façade scaffold systems that have standards made of steel or aluminium alloy and have other elements made of these materials or timber based materials. • It defines a standard set of system configurations under which the structural design is carried out. Other configurations may be possible with some systems, but they are outside the scope. • This standard should be read in conjunction with EN 12811-1, prEN 12811-2, EN 12811-3 and EN 12810-2 which specify certain of the requirements. • This standard does not specify requirements for protection fans. It does not give information about erection, use, dismantling or maintenance. 2. Normative references 3. Terms and definitions Scaffold system Component Element Connection device Configuration System configuration Standard set of system configurations System width (SW) Assessment 4. Classification A scaffold system shall be classified in accordance Classification criterion Classes 5. Designation The designation of a scaffold system, which is in conformity with this standard shall consist of the following parts. Scaffold EN 12810 — 4D — SW09/250 — H2 — B — LS The example is of a scaffold of load class 4, system width at least 0,9 m and less than 1,2 m bay length 2,5 m, headroom between working areas and transom or tie member 1.9mtr with cladding or ladder staircase 6. Materials 1 General In accordance with clause 4 of EN 12811-1:2003 andwith prEN 12811-2. Information about the most commonly used materials is given in prEN 12811-2. 2 Types of material - The standards shall be made of steel or aluminium alloy. 3 Inspection documents - The materials used for load bearing elements shall be supplied with a test report in accordance with EN 10204 7. General Requirements The standard set of system configurations Further requirements 8. Requirements for structural design 1 Actions 2 Resistances, stiffness’s 3 Application of wind loads 4 Drop tests for platforms 5 Durability 6 Vibration tests 7 Deflections 9. Manuals Product manual Instruction manual 10. Marking 11. Assessment **ANNEX** Annex􀁂A A.1 Fundamental system components A.2 System components to provide side protection A.4 Ancillary components Annex􀁂B Typical bracing methods Annex􀁂C (Informative) Information about A-Deviations, selection of classes and administrative national regulations Annex ZB (Informative) National A-Deviations *BRITISH SCAFFOLD STANDARD *BSEN 12810 SCAFFOLD STANDARD *BRITISH SCAFFOLDING STANDARD KE BAARE ME PURA INFORMATION *GULF ME SCAFFOLD KA KONSA STANDARD HAI *INDIA & GULF KELIYE SCAFFOLD STANDARD *SCAFFOLDING BRITISH STANDARD *SCAFFOLD STANDARD *SYSTEM SSCAFFOLDING *STEEL PIPE SCAFFOLDING *SCAFFOLDING KIS STANDARD SE BANANA HAI *SCAFFOLDING MATERIAL BS EN 12810-1 scaffolding standard explained BS EN 12810 façade scaffolds part 1 British scaffolding standards full information EN 12810 vs EN 12811 scaffolding standards Scaffolding product specifications EN 12810 Scaffolding classification EN 12810 Scaffolding designation example EN 12810 British scaffold standards EN 12810-1 Gulf scaffolding standards explained India and Gulf scaffolding standards Scaffold standards and codes of practice System scaffolding EN 12810 Steel pipe scaffolding British standard Scaffolding kis standard se banana hai Scaffolding materials steel aluminium timber Scaffolding material testing EN 12810 Scaffolding structural design EN 12810 Prefabricated scaffold systems EN 12810 Façade scaffold EN 12810 classification & marking Scaffolding manuals and marking requirements EN 12810 #British #scaffolding #standard #scaffolding #training #standard #workatheight #guidelines    • SCAFFOLDING INTERVIEW QUESTIONS & ANSWERS ...      • ✅ SCAFFOLDING INSPECTION CHECKLIST | SCAFF...      • CISRS SCAFFOLDING SUPERVISOR TRAINING SYLL...      • INDIAN SCAFFOLD STANDARD | IS 3696 - SAFET...      • SCAFFOLDING TRAINING INSTITUTE IN INDIA | ...      • WORK AT HEIGHT REGULATIONS 2005 | ARRANGEM...      • SCAFFOLDING INTERVIEW QUESTIONS & ANSWERS ...      • CUPLOCK SCAFFOLD | CUPLOCK SCAFFOLDING COM...      • Hanging scaffold || Suspended Scaffold || ...      • CANTILEVER SCAFFOLD | ERECTION | RATIO | L...      • SCAFFOLD STANDARD | IS -3696 | BS-12810-11...