Front O2 Sensor Install + Replacing the Throttle Cable | @dsmnick скачать в хорошем качестве

Front O2 Sensor Install + Replacing the Throttle Cable | @dsmnick

Today , we install o2 sensor and throttle cable on the eclipse. Link to the cable: https://a.co/d/9mpBZAl 02 sensor: At this point of the build, more small things to work on. The o2 sensor that I originally installed was from a junkyard eclipse. I did not know the condition or even if it worked or not. Sooner than later, we had a code for bank 1 sensor “circuit too high”. This code projects to the wiring or internal failure of the o2 sensor. I replaced the sensor with the correct part, reset the battery and computer memory, then drove the car, repair is fixed. The part number is in the video. Throttle cable: (My apologies for lack of video clips.) You can use 1g non cruise cable as well. It will look a little long so route it nicely. For this build to work properly, we need a good connection from the throttle pedal to the throttle body. Some applications are different. Difference being cruise or non-cruise control cables. I used a non-cruise cable. It’s not OEM but a good brand replacement, almost identical. Installation was easy, remove the cable, a couple bolts to the firewall (do not lose these) then to the cable. Adjustment is on the intake, loosen the bolts slightly and adjust the tension to your liking. I went on a test drive to verify no binding, or any inconsistencies. Repair is fixed. Let me know if you guys have any questions or concerns down in the comment section below! Want to see more? Subscribe! Follow my Instagram too! @dsm_nick / dsm_nick DSMtuners! https://www.dsmtuners.com/members/nic...