Bolt Kit Replacement on Helux Pin Box V1 скачать в хорошем качестве

Bolt Kit Replacement on Helux Pin Box V1

Replacing the bolt kit on your CURT Helux pin box requires the right tools, proper support, and close attention to safety. In this video, we walk through the correct procedure for removing and reinstalling your 5th wheel pin box hardware to ensure a secure and reliable connection. Start by chocking all tires to prevent movement during the process. Raise the front of the fifth wheel to the desired height, and place jack stands securely under the frame to properly support the unit. Keep in mind that the pin box assembly can weigh more than 140 pounds, so at least two people are required for safe removal and installation. A forklift can also be used to help lift and position the pin box, as demonstrated in the video. Before removing the mounting bolts, make sure the pin box is fully supported. Once removed, position the new pin box back into its original mounting location. While holding it securely in place, install only the new hardware included in the replacement kit. Proper torque is critical. The 5/8-inch bolts must be torqued to 120 ft-lb, plus or minus 5 ft-lb, to ensure the 5th wheel pin box is fastened correctly and performs as intended. Watch the full video for a clear, step-by-step overview of the bolt kit replacement process so you can complete the job safely and correctly. Shop our store at https://www.lippert.com/towing-traile... For technical resources and support, visit https://support.lci1.com/, and don’t forget to subscribe to our channel! #lippert #helux #fifthwheel #pinbox