How to Build a Rolling Library Ladder | This Old House скачать в хорошем качестве

How to Build a Rolling Library Ladder | This Old House

In this video, This Old House senior technical editor Mark Powers shows how to install a library ladder. (See below for a shopping list and tools.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse You might assume a rolling ladder belongs in a dark-paneled library filled with brass lamps and leather-bound first editions. But such a handsome and useful piece works equally well in a kitchen, to reach high cabinets; in a family room with a towering bookcase; or even in a cheerful reading nook, like the one at right. Hardware kits typically include rollers, wheels, and fasteners for the ladder; you'll buy the track separately and cut it to length. You can, of course, buy the ladder, unassembled, but we built ours from sturdy red oak. Follow along as This Old House senior technical editor Mark Powers walks you through the steps. Shopping List for How to Build a Rolling Library Ladder: 1x4 oak boards, Get two 10-footers for the handrails. 1x5 oak boards. Get one 10-footer for the treads. 3/4-inch oak spindle. Get one 15 1/4-inch-long piece. Ladder hardware kit. Order one that includes rollers, wheels, and fasteners. Track hardware. Order a track to fit the width of your bookcase, plus brackets and finials. Wood glue Primer Paint Tools for How to Build a Rolling Library Ladder: Tape measure Miter saw Combination square -Jig saw or Circular saw Drill/driver Clamps Router 7/8-inch Forstner bit 13/16-inch straight router bit 3/8-inch roundover router bit with pilot 1/8-inch bit 1/4-inch bit 23/64-inch bit 120-grit sandpaper 2 1/2-inch angled sash brush Mallet Hex-key wrench Adjustable wrench Phillips-head screwdriver 2-foot level Hardware: Custom Service Hardware Rolling Hook Ladder Hardware Kit in Black, about $503; 8-Foot Round Rail in Black, about $95; four Vertical Hook Brackets, about $10 each; Stop Kit with round black finials, about $45; Red Oak Top Rung (spindle), about $14; Custom Service Hardware [https://www.cshardware.com/] Cut list for Building a Rolling Library Ladder Designed to reach an 8½-foot-tall shelf (on a 10-foot-high bookcase) in the climbing position. 1x4 red oak boards for the handrails: two @ 107 inches 1x5 red oak boards for the treads: one @ 103¼ inches, cut to seven 14¾-inch lengths ¾-inch red oak spindle: one @ 15¼ inches Note: Although the formula from Custom Service Hardware for sizing and angling the handrails is ideal for a track installed 7 feet 7 inches high, the company applies it to ladders of any size. This saves a step of calculating angles but means that shorter ladders will have a shallower pitch and taller ladders a steeper one. The design of the wheels allows them to maintain solid contact with the floor for ladders made with this formula for bookcases as tall as 18 feet. Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: https://bit.ly/2GPiYbH Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: https://www.thisoldhouse.com/pages/st... Follow This Old House and Ask This Old House: Facebook: http://bit.ly/ThisOldHouseFB Twitter: http://bit.ly/ThisOldHouseTwitter http://bit.ly/AskTOHTwitter Pinterest: http://bit.ly/ThisOldHousePinterest Instagram: http://bit.ly/ThisOldHouseIG http://bit.ly/AskTOHIG For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite How to Build a Rolling Library Ladder | This Old House    / thisoldhouse