How to fix timing hook For twin needle juki machine скачать в хорошем качестве

How to fix timing hook For twin needle juki machine

How to fix hook timing for juki Lu-1560-6dial to zero(0)the timing procedure also same the other machine like juki lu-1510-7and lu-1510N-7,turn on handwheel loosen needle bar screw,needle bar conection to adjust so that a clearance of a1.5 mm is provided between the top end of the needle,blade point,of the hook when needle bar raised by 2.3mm from the lowest position,the tighten the screw again,turn the handwheel make a needle bar ascend by 2.3mm from the lower position,and tighten back screw set,loosen the small gear screw ,when u install hook ,tighten screw first for groove hook shaft,loosen set screw for large hook gear and move right or left,adjusting blade point for the hook aligned with the centr of needle,Make a distance needle and hook 2or 2.3mm,and tighten screw. Thanks for visit 👉I hope u enjoy this video. 👉If u like this video plz subscribe Technical Access and press the bell icon for more related video. 👉   • How To Setting Hook Timing|| Durkop Adler ...  .