How to build a slide out drawer / DIY / Land Rover Discovery 3 / LR3 LR4 скачать в хорошем качестве

How to build a slide out drawer / DIY / Land Rover Discovery 3 / LR3 LR4

#Landrover #LandroverDiscovery #LR3 In this video we show you how we constructed our full-size slide-out drawer for our Land Rover Discovery 3 and 4 in full detail. Hope you enjoy the video and thanks for watching, Vera & Christian Here is a link to the full drawing package and bill of material, including the full manufacturing details for each part.   / 67501728     / drawings-of-lr-68306814   Bill of Material: 1 Set Junker heavy duty rails with latch, 1016 mm, 250 kg 1 laminated ply wood, 15 mm thick, water proof or epoxy coated (Siebdruckplatte) cut to 1000 mm wide x 1060 mm long 20 Barrel nuts, M6 x 15, stainless 20 Flat head screws, stainless, M16 x 16 Aluminum angle material, 100x50x5 (look out for good quality, straight material with true corners) Aluminum angle material, 50 x 50 x 5 Lot M6 hex nuts Lot M6 x 12 button head screw for mounting rails to drawer 1 x Loctite 242 Lot Spacer material as needed (we used aluminum, 40x1 mm cut to 40 mm pieces and drilled 10 mm through 4 pc. M8 x 40 socket head screw, stainless or galanized for mounting the drawer in the car M8 washers -- end of bill of material -- We are not liable for any harm you do to your car, your engine, your surroundings or to yourself. Use the information given in this video at your own risk. The videos we provide are primarily for entertainment and not to be used as instructions. Any products and spare parts we use in our videos are chosen by us and not provided by any sponsors. We do not recommend the parts we use in our videos as we mostly use Aftermarket low-cost brands due to cost. Become a Patreon and support our channel:   / lrtime