Configure VRRP on mikrotik load sharing with dhcp server скачать в хорошем качестве

Configure VRRP on mikrotik load sharing with dhcp server

1-Set Router to Internet 2-Add NAT 3-Add Route 4-Add DNS 5-Create Vlan Interface 6-Set ip to vlan Router R1 ---------- Add VRRP interface for vlan10 and vlan20 Vlan10 = VRID:10 (must be same in master and backup router) Priority: 200 (must be big than backup) Vlan20 = VRID:20 (must be same in master and backup router) Priority: 100 (must be less than master) Virtual Gateway (Must be the same master and backup router) Vlan10: 10.10.10.254/24 Vlan20: 20.20.20.254/24 Setup DHCP Server for vlan10 and vlan20 interface select interface vrrp on vlan vlan10 start: 10.10.10.100-10.10.10.253 vlan20 start: 20.20.20.100-20.20.20.253 Manage Switch ---------- Configure Manage Switch cisco Port: g0/0, g0/1 (Configure as trunk port) Port: g0/2 (Access vlan10) Port: g0/3 (Access vlan20) Router R2 ---------- Add VRRP interface for vlan10 and vlan20 Vlan10 = VRID:10 (must be same in master and backup router) Priority: 100 (must be less than master) Vlan20 = VRID:20 (must be same in master and backup router) Priority: 200 (must be big than backup) Virtual Gateway (Must be the same master and backup router) Vlan10: 10.10.10.254/24 Vlan20: 20.20.20.254/24