How to Build a Cabinet for Organizer Box Storage Containers with Additive Woodworking Cabinetmaking скачать в хорошем качестве

How to Build a Cabinet for Organizer Box Storage Containers with Additive Woodworking Cabinetmaking

Parts organizer boxes are great storage solutions, and it's a best to store them in a cabinet so you can access each one easily without having to unstack several to get to the one you're looking for. This cabinet is designed using "additive" woodworking techniques instead of cutting dados for the organizer box supports with a table saw or a router. This cabinet is designed with support strips to hold each storage container separately. It's slightly wider than the HDX and Someline organizer boxes I'm using. The cabinet has 2 sides made of 1/2 inch plywood and a top and bottom made of 3/4 inch plywood. The sides will get another 1/4 inch piece of plywood attached to it so the cabinet edges are the same width all around. To understand how to build cabinet boxes, watch our previous video in this series    • Video   With the sides, back, top, bottom, and nailer strips cut, the next step is to make the spacers between the organizer box support strips and the support strips. I cut the support strips on an angle on the front. Attaching the the supports and spacers to the cabinet sides can be tricky as all the parts will have glue on them. To make it easier, I use CA glue and an activator spray to instantly glue the front edge (it takes 5-10 seconds). That way it's held in place while the rest of the parts are drying from the PVA glue (aka carpenter's glue). After the sides are glued up, I drive in screws from the cabinet side, into the support strips for added strength. These storage box containers can get heavy with metal fasteners, so strength is important. I then add iron-on veneer edging the Cabinet Sides to conceal the face of the plywood edge. The rest of the cabinet goes together like a traditional cabinet. Screw the top and bottom to one side. Slide in the back. Screw on the second cabinet side, and then install the nailers on the back. As a finishing touch, I also add a sheet of maple veneer to the side of the cabinet that will be visible. I use contact cement to make a strong and permanent bond. RELATED VIDEOS: Playlist for Workshop Organization and Tool Storage -    • Workshop Organization and Tool Storage   How to Build Easy Upper Cabinets -    • Video   Organize Workshop with Small Parts Organizers and Storage Cabinets -    • Workshop Organization with Small Part...   LINKS: Countersink Drill Bit with Depth Stop - https://amzn.to/3kpvHTS Canadian Link -https://amzn.to/3EE8Eg0 90 Degree Clamping Squares - https://amzn.to/3hUPjxv 🇨🇦 https://amzn.to/3tUG31e HDX Small Parts Organizer Boxes - https://amzn.to/2YOhXJZ 🇨🇦 https://amzn.to/3p6e4LM SOMELINE Clear Organizer Box - https://amzn.to/3j7qOxF 🇨🇦 https://amzn.to/3BGaM58 Note: purchases made with these links help contribute to our video production work VIDEO TOPICS: 00:00 How to Build a Cabinet for Organizer Box Storage Containers Using Additive Woodworking Techniques 00:45 Design for the Organizer Box Cabinet 01:39 Cutting Organizer Box Support Strips 02:22 Determining Size of Spacers Between Support Strips 03:06 Gluing on Supports and Spacers using CA Glue and PVA Glue 06:30 Installing Screws in Support Strips Through Cabinet Side 08:13 Adding Veneer Edging to Cabinet Sides 11:12 Start Assembling the Cabinet 12:48 Assemble the Cabinet Back 13:31 Assemble the Nailers for Attaching the Cabinet to the Wall 14:39 Adding Veneer to the Cabinet Side 15:53 Finished Cabinet Our Newsletter - Sign up at https://WoodenItBeNice.ca Our Woodworking Plans - https://woodenitbenice.ca/collections... Our 1-on-1 Woodworking Advice Sessions - https://woodenitbenice.ca/collections... See the tools we use in our workshop and the tools we recommend: https://www.amazon.com/shop/homeimpro... 🇨🇦 Canadian link - https://www.amazon.ca/shop/homeimprov... For more woodworking knowledge or to contact us directly, visit our website https://WoodenItBeNice.ca Hosted by Scott Bennett, owner of Wooden It Be Nice in Brooklin, Ontario, Canada #Cabinet #Organizer #AdditiveWoodworking