Do You Really NEED an Expensive Drum Kit?? скачать в хорошем качестве

Do You Really NEED an Expensive Drum Kit??

Do you really NEED an expensive drum kit like a Pearl Masterworks, Yamaha Phoenix, DW Collector Series, Tama Starclassic or some other top of the line drum kit to be a good drummer?? I compare my Pearl Masterworks 10" tom vs my Pearl Export 10" tom in this video. The results may surprise you! 0:00 Do you need an expensive kit? 0:45 My first junky kit in 1982 2:10 Pearl ELX (1999 model) 3:56 A/B of 10" toms 5:07 A/B of full kit thru mics 6:53 The Vinnie Lick 7:23 Conclusion If you liked this video, please like, comment, share & subscribe! ~Jeff Wald~ Masterworks specs and tour video:    • Pearl Masterworks tour 2021 version   The kit is basically in Pearl Reference Specs except all have at least 2 plies of mahogany on the inside (which is stained red) and adding 4 plies w/ the floor and even more mahogany with the Gong & kicks. The rest of the plies in each are maple except for the snare. We named the finish Red Bubinga Burst. I had them darken 25% of each drum to the edge. The gong is 40% fade only on the head side b/c its single headed. The only regret is that on the smaller drums you really can’t tell b/c I didn’t think about the rims covering the edges. Oh well, still looks amazing in person. Snare (Mic’d with Audix i5) 14x5.75". 10 ply, 12.5mm "Regular" - 2 inner Birch, 7 ply Maple in the middle, 1 ply outer Bubinga. It also has the triple snare throw off. This thing looks amazing and lets you choose 3 different 6 strand snares allowing you to mix and match all of them. However, I've been using a 24 strand one from another Pearl snare for years. Toms (Mic’d with Audix D2) 6x7" Rack Tom - 6 ply, 7.5mm "Regular"; 2 inner Mahogany, 3 ply Maple in the middle, 1 outer Bubinga; Edge is Rounded 45 degree 8x7.25" Rack Tom - 6 ply, 7.5mm "Regular"; 2 inner Mahogany, 3 ply Maple in the middle, 1 outer Bubinga; Edge is Rounded 45 degree 10x7.75" Rack Tom - 8 ply, 7.2mm "Thin"; 2 inner Mahogany, 5 ply Maple in the middle, 1 outer Bubinga; Edge is Rounded 45 degree 12X8.5" Rack Tom - 8 ply, 7.2mm "Thin"; 2 inner Mahogany, 5 ply Maple in the middle, 1 outer Bubinga; Edge is Rounded 45 degree 13x9.5" Rack Tom on left - 6 ply, 7.5mm "Regular"; 2 inner mahogany, 3 ply Maple in the middle, 1 outer Bubinga; Edge is Rounded 45 degree Floor Toms (Mic’d with Audix D4) 14x13" Floor Tom - 8 ply, 10mm "Regular"; 4 inner Mahogany, 3 ply Maple in the middle, 1 outer Bubinga; Edge is Rounded 45 degree 16x15" Floor Tom - 8 ply, 10mm "Regular"; 4 inner Mahogany, 3 ply Maple in the middle, 1 outer Bubinga; Edge is Rounded 45 degree Gong Drum (Mic’d with Audix D6) 20x15"– 8 ply, 10mm "Regular"; 7 ply Mahogany, 1 ply Bubinga on the outside. Fully Rounded Edge. Finish is a fade from the head down instead of the burst like the rest b/c of it being single headed Kick Drums (Mic’d with Audix D6s) 22x17 kicks. 10 ply, 12.5mm "Regular"; 6 inner are Mahogany - BOOM!! The middle 3 plies are Maple and the outside Bubinga. Overheads (Mic’d with two Audix SCX-25A) Cymbals from left to right: 17” Sabian Xtreme China regular finish 10” Zildjian K Splash 14” Hi-Hats: K Custom Session (Steve Gadd model) 19” Zildjian K Dark Crash 20” K Custom Session Ride (Steve Gadd model) 14” Zildjian Mastersound as second hi-hat 18” Zildjian A Custom Crash