У нас вы можете посмотреть бесплатно Toyota Celica Replacement Remote Programming 2000 2005 или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Visit us at http://www.carandtruckremotes.com/ Procedure To Program Toyota Celica Wireless Remote Transmitters: Begin with: The driver's door open and unlocked. Key out of the Celica ignition. 1. Insert and remove the Celica key from the ignition switch 2 times within 5 seconds. NOTE: Steps 2 and 3 should be performed within 40 seconds. 2. Close and open driver's door TWICE. 3. Insert the key into the Celica ignition and remove it. NOTE: Steps 4 - 6 should be performed within 40 seconds. 4. Close and open the driver's door twice. 5. Insert the key into the Celica ignition. 6. Close the Celica door. 7. Turn the Celica ignition switch from "Lock" to "On" and back to "Lock" at about 1 second intervals to select the desired mode: 1 time for ADD mode. 2 times for REWRITE mode. 3 times for CONFIRMATION mode. 5 times for PROHIBITION mode. 8. Remove the key from the ignition. 9. To confirm your mode selection, the power locks will now cycle "lock" to "unlock" a number of times corresponding to your key cycles in step 7. NOTE: If Confirmation or Prohibition modes have been selected, opening the door will complete the procedure. 10. For Add or Rewrite modes do the following within 40 seconds of Door Procedure Lock confirmation: A. Press both car transmitter Lock and Unlock buttons simultaneously between 1 and 1.5 seconds and release. B. Within 3 seconds of step A, press the transmitter Lock button for more than 1 second and release. If the keyless entry remote transmitter has been successfully programmed, the power locks will cycle "lock" to "unlock" once at this time. If there are problems with the remote transmitter or the procedure up to this point, the locks will cycle twice. If this occurs, verify that you have received the correct transmitter, and then repeat the above procedure. C. If multiple remotes are to be reprogrammed, repeat steps A and B. 11. Open the driver's door to conclude programming mode.