У нас вы можете посмотреть бесплатно Federal Signal SmartSiren Siren and Light Control System или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
http://sirennet.com/fsss2000.html Federal Signal's SmartSiren electronic siren and light control is the most technologically advanced unit available. Using microprocessors and state-of-the-art design, SmartSiren systems pack all the features you need into an ultra-compact package! The SmartSiren system consists of a control head and a separate amplifier/relay unit. The control head features a four-position slide-switch, for quick activation of warning functions, and up to seventeen push-buttons. SmartSiren units offer the standard siren tones (Wail, Yelp, Hi-Lo, Priority, Air Horn and Manual) and several advanced features, such as horn ring transfer, radio rebroadcast, and PA. There is also provision for the installation of a user-supplied switch to activate lights and siren in pursuit mode. To use the PA feature, a separate microphone (Model MNCT-SB) must be purchased. If the amplifier is mounted remotely, a microphone extension cable (Model RMK) is also required. The SmartSiren system can drive 58-watt, 100-watt, and 200-watt speakers. Both models provide for activation of five 10 amp auxiliary circuits. For control of lights and auxiliary functions, eight relay outputs are available: one 40-amp, two 20-amp, and five 10-amp outputs. Model SS2000SM-SD adds four buttons for control of a SignalMaster directional light. Additionally, model SS2000SM-SD enables control of seven distinct patterns (three directional and four flashing warning) on six-lamp or eight-lamp SignalMaster units. An LED display on the control head flashes in the same pattern as the one currently selected. For added versatility, the SmartSiren system can be configured at the point of installation. Users can select desired functions and program them through the control head. Installing the SmartSiren system is easy. The amplifier/relay unit can be remotely located and connected to the control head via a 25-foot wire with telephone-style connectors. The supplied mounting bracket allows the assembly to be located in a variety of positions. The SmartSiren control head is "Air Bag Wise", when installed properly it won't interfere with deploying air bags. SmartSiren Features: Electronic siren and light control combined. Functions programmable at the point of installation. Power versatility -- 58, 100, and 200 watts. "Air Bag Wise" -- 1-inch thick control head. Easy action rubberized push-buttons. Buttons backlit for easy nighttime viewing. Easy installation with supplied connectors. Slide-switch positions can activate one or more light and siren functions. Push-buttons can be specified to be on/off or momentary. Eight-second timer can be programmed to any switch function. Audible "chirp" feature can remind user of the active status of the siren. Supplied function labels identify switches and are easily replaced. SS2000SS-SD Features: Wail, Yelp, Hi-Lo, Air Horn, Manual, Priority, and horn ring transfer. Program mode can be disabled to prevent unauthorized reprogramming. Siren tones and light functions can be configured independently of each other. "Power Up" siren tone may be selected (Wail, Yelp, Hi-Lo, or Priority). Each slide-switch position can be configured to operate any combination of eight relays, PA, horn ring transfer, and siren enable. Any button on the siren row, except STBY, can be enabled or disabled. SS2000SM-SD has all of the same features as the SS2000SS-SD plus: Control of up to seven distinct SignalMaster patterns. Configuration of the slide-switch positions to operate any combination of eight relays, PA, horn ring transfer, siren enable, and any of the four SignalMaster warning patterns. Approvals Meets SAE J1849 and CCR (CAC) Title 13, article 8 requirements for sound when coupled with any Federal Signal SAE and CCR approved speaker. Specifications Input Voltage: 11-16 VDC Standby Current: 0.5 Amps Operating Temperature: -30°C to +65°C Frequency Range: 700 to 1500 Hz (nominal) Nominal Cycle Rate: Wail - 12 cycles/min. Yelp - 180 cycles/min. Hi-Lo - 60 cycles/min. Voltage Output: 62-66 volts peak-to-peak Audio Response: 300-3000 Hz +/- 3dB Audio Power: 45 Watts in PA mode Input Impedance: (PA) 4000 ohms (nominal) Physical Specifications - Amplifier Length: 6.3 in (15.9 cm) Width: 6.4 in (16.2 cm) Height: 2.3 in (5.9 cm) Ship Weight: 6.0 lbs (2.7 kg) Physical Specifications - Control Head Length: 6.8 in (17.2 cm) Width: 1.3 in (3.3 cm) Height: 3.1 in (7.9 cm) Shipping Weight: 1.0 lbs (0.5 kg) Optional Accessories MNCT-SB Noise-cancelling microphone RMK Extension cable for microphone AS124 100-watt speaker (model 750501) MS100 DynaMax 100-watt speaker UPKM-3 Park siren deactivator module Federal Signal Two Year Warranty