Mordaunt Short and Onkyo 5.1.2, Mordaunt Short Avant 908, 905C, 903S, MS302, MS309W, Onkyo TX-NR686 скачать в хорошем качестве

Mordaunt Short and Onkyo 5.1.2, Mordaunt Short Avant 908, 905C, 903S, MS302, MS309W, Onkyo TX-NR686

Hello! Today we have this Mordaunt Short and Onkyo setup. All speakers fit each other really good and they sound amazing! A good quality setup and really enjoyable to listen to. Music in this video: Dire Straits - Planet Of New Orleans Speakers in this video: Front: Mordaunt Short Avant 908 Center: Mordaunt Short Avant 905C Surround: Mordaunt Short Avant 903S Height: Mordaunt Short MS302 Subwoofer: Mordaunt Short MS309W Amplifier: Onkyo TX-NR686 Specs of the speakers and Amplifier: Speakers: Front, Mordaunt Short Avant 908: System type: 3-way Bass reflex: yes Ohm: 8 Frequency response: 35-22000 Hz Amplifier Requirements: 15-200W Sensitivity: 90dB Tweeter: 1 x 25mm Midrange 2 x 130mm Woofer: 1 x 255mm Weight: 19kg Center, Mordaunt Short Avant 905C System type: 2-Way Ohm: 8 Tweeter: 1 x 25mm Midrange: 2 x 133mm Connectivity Technology: wired Surround, Mordaunt Short Avant 903S Enclosure Type: 2 way reflex loaded Cross Over Frequency: 2nd Order damped LF 1st Order Frequency Response at 3dB: 120Hz to 20kHz Nominal Impedance: 4-8 Ohms Amplifier Power Range: 15 to 75 watts Sensitivity SPL/m/2.83V: 87dB Dimensions (HxWxD) in mm: 230x218x150 Weight: 2.86Kg Height, Mordaunt Short MS302: Enclosure Type: 2 way reflex loaded Frequency Response at 3dB: 100Hz to 20kHz Nominal Impedance: 4-8 Ohms Amplifier Power Range: 15 to 75 watts Sensitivity SPL/m/2.83V: 86dB Weight: 4,4kg Subwoofer, Mordaunt Short MS309W: Frequency response: 35Hz – 200Hz Sensitivty: Line in, 70mV (at max output)Hi Level in, 1.3V (at max output) Output Power: 150W Mains Voltage: 220-240 Volts, 50 Hz100-120 Volts, 50-60 Hz Power Consumption: 340W Drivers: 250mm Long Throw Aluminium CPC Woofer X/Over Type: Active/Variable from 50 – 200 Hz Size (H x W x D)mm: 370 x 370 x 370 Size (H x W x D)Inches: 14.6 x 14.6 x 14.6 Weight: 15kg / 33Lbs Amplifier: Onkyo TX-NR686: Channel: 7.2 Power Output per Channel: 100 W per channel @ 8 Ohms, 20 Hz to 20 kHz, 0.08% THD, 2-channels driven, FTC 210 W per channel @ 6 Ohms, 1 kHz, 10% THD, 1-channel driven Dynamic Power per Channel: 120 W (8 Ohms, front), 210 W (4 Ohms, front), 240 W (3 Ohms, front) THD & Noise: 0.08% (20 Hz to 20 kHz, half power) Input Sensitivity and Impedance: Line/Unbalanced: 200 mV / 47 kOhms Phono/MM: 3.5 mV / 47 kOhms RCA Output Level and Impedance: Subwoofer Pre-Out, Rated: 1 V / 470 Ohms, Zone 2 Line Out, Rated: 200 mV / 2.3 kOhms Phono Overload: 70 mV (MM, 1 kHz, 0.5%) Frequency Response: 10 Hz to 100 kHz / +1 dB, -3 dB (Direct Mode) Tone Control: Bass: ±10 dB, 90 Hz, Treble: ±10 dB, 7.5 kHz Signal-to-Noise Ratio: 106 dB (line, IHF-A), 80 dB (phono, IHF-A) Speaker Impedance: 4 to 16 Ohms Damping Factor: Not specified by manufacturer Amplifier Class: Linear Class A/B Thank you for watching, bye!