6S Lipo With Flywoo Explorer LR4 O4 Pro | Configuration Setup скачать в хорошем качестве

6S Lipo With Flywoo Explorer LR4 O4 Pro | Configuration Setup

6S Lipo With Flywoo Explorer LR4 O4 Pro | Configuration Setup -next test flight will be on 6S! -goal is for less battery sag on full throttle punch and of course, more thrust! -did some research and found the Flywoo Explorer LR4 flight controller and ESC is 6S capable! -recommendations are to setup a separate PID Profile for 6S and reducing the motor output limit value from 100 to 65-70% to prevent ESC and/or motor burn out -reducing the PID Master Multiplier to about 10% is recommended -I did the math for a 6S 650mah at 95C discharge with the above settings will hit a maximum amp of about 61.75 amps at 100 motor output limit -reducing this to 75% motor output limit should hit a maximum amp of about 43.23 amps -going to set mine at 75% motor output limit which should hit a maximum apt of about 46.31 amps -according to the ESC specifications, 50 amps maximum is capable for 10 seconds https://flywoo.net/products/goku-g45m... -on this test flight with 4S the maximum amps at 100% throttle was 31.40 4S 850mah 6S 650mah BF 2025.12.1 #dji #fpvpilot #fpv #fpvdrone #drone #acroflight #drone #droneflight #FLYWOO #FLYWOOLR4 #FLYWOOLR4O4PRO