Скачать с ютуб etrailer | Lippert Components Trailer Jack LC342610 Review в хорошем качестве

etrailer | Lippert Components Trailer Jack LC342610 Review

Click for more info and reviews of this Lippert Camper Jacks,Trailer Jack: https://www.etrailer.com/Accessories-... Check out some similar Camper Jacks,Trailer Jack options: https://www.etrailer.com/dept-pg-Acce... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-Lipp... Speaker 1: Today we're going to be taking a look at the replacement rear leg for the Lippert ground control 3.0 six point leveling system. This is going to replace the original jack that came with your system. This is the shorter eft side, so this side would be mounted to your trailer. This would be the rear. That would be forward. Again, left side rear. This is a shorter leg. It's going to be about two inches shorter than the other left side rear leg. This is going to have all the same features as your original jack.The wiring already installed there, so it's just going to clip up to your system. Motor's already attached. Has the manual override option up at the top, as long as you remove that little cap. You can operate that there. Just put that back in there to make sure that it keeps out any dust or debris or water from getting in there and causing any damage. It does have the large, round foot plate already attached, and that's going to disperse the weight of your trailer so you don't have to worry about sinking into softer ground. It does have the mounting bracket attached on there. It's welded to the jack.You will have to provide your own hardware to get this reinstalled on your camper or RV. But you can reuse that hardware if it's still in good condition from the original. So that's going to do it for our look at the Lippert ground control 3.0 replacement leg for the left rear side.