STM32 Black Pill DFU Mode & Firmware Flashing Made Easy скачать в хорошем качестве

STM32 Black Pill DFU Mode & Firmware Flashing Made Easy

In this hands-on tutorial, learn how to put your STM32 Black Pill board into DFU (Device Firmware Upgrade) mode and flash firmware without using an ST-Link or any external programmer — just a USB cable! This guide walks you through the process of entering DFU mode and flashing your firmware using Inav Configurator or dfu-util. If you’re working with an STM32F411-based Black Pill board, this is the easiest and most efficient way to get your firmware uploaded. 👉 In this video, you’ll learn: How DFU mode works on STM32 microcontrollers How to enter DFU mode on a Black Pill board How to flash firmware via USB using Inav Configurator How to exit DFU mode and boot into your firmware 💻 What You Need: STM32 Black Pill ( STM32F411CEU6) USB-C Type USB cable INAV Configurator Your firmware .hex file 📥 Useful Links: https://github.com/rizacelik/STM32F41... dfu-util: https://dfu-util.sourceforge.net/ 💡 Note: Make sure your Black Pill has the correct bootloader and USB support enabled to use DFU mode. 🛠️ Troubleshooting tips included! 👍 Like the video? Don't forget to like, subscribe, and comment if you have any questions or run into issues.