Fix PS3: Error code 8002F14E (An error occurred during the update operation) скачать в хорошем качестве

Fix PS3: Error code 8002F14E (An error occurred during the update operation)

PS3: An error occurred during the update operation. (8002F14E) Normally, you'll encounter this error code during a system update when your PS3 reaches approximately 30% to 99%. At that point, the update fails, and the error code appears. (Console is stuck in an update loop) This error occurs when the Blu-ray drive controller IC doesn't respond during the update process. It's usually caused by a faulty ribbon cable or a problem with the Blu-ray drive's logic board. Also, if your Bluetooth and Wi-Fi are not working on your PS3, you won't be able to update the system. Try the steps below: Something may be wrong with your PS3 disc drive. The ribbon cable inside might have come loose, Pull the system open and make sure all the cables to the disc drive are connected properly. https://www.ifixit.com/Guide/PlayStat... Try going into safe mode and run HDD diagnostics.    • How To Enter Safe Mode /Recovery On Any PS...   While in safe mode Choose Option 3: Restore File System (Fixes corrupted data) If that fails, you may need to: Remove the HDD. Format it externally. Reinsert and do a fresh firmware install via USB (download from Sony's official site). https://www.playstation.com/en-ca/sup... You may still hit a wall if the PS3 demands a working Blu-ray controller board. If you're comfortable with hardware, you can buy a replacement Blu-ray laser or full drive for your PS3 model. Make sure to transfer the daughterboard (controller board) from your original drive to the replacement—otherwise, the new drive won’t work (it’s tied to your PS3’s motherboard). Consider having it repaired by a technician if you're not experienced with electronics.