How To Replace Lower Control Arm 1997-04 Dodge Dakota скачать в хорошем качестве

How To Replace Lower Control Arm 1997-04 Dodge Dakota

Buy Now! New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF00552 Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 1997-2004 Dodge Dakota. • Check here for more videos on the 1997-2004 Dodge Dakota:    • Playlist   This repair was done on a 2002 Dodge Dakota Base 3.9L and the process should be similar on the following vehicles: 1997 Dodge Dakota 1998 Dodge Dakota 1999 Dodge Dakota 2000 Dodge Dakota 2001 Dodge Dakota 2002 Dodge Dakota 2003 Dodge Dakota 2004 Dodge Dakota Tools you will need: • Pry Bar https://trq.video/odc-1AXAA00020 • 15mm Wrench https://trq.video/odi-1AXAA00010 • 10mm Socket https://trq.video/ojL-1AXAA00017 • 17mm Socket https://trq.video/omI-1AXAA00015 • 18mm Socket • 21mm Socket • 23mm Socket • 25mm Socket • Brake Caliper Hanger https://trq.video/o7-1AXAA00439 • Locking Pliers https://trq.video/oao-1AXAA00139 • Side Cutters • 1/2 Inch Breaker Bar https://trq.video/oaM-1AXAA00078 • Ratchet https://trq.video/onM-1AXAA00016 • Torque Wrench https://trq.video/ohp-1AXAA00044 • Liquid Thread Locker • 7mm Hex Socket • Floor Jack https://trq.video/odz-1AXAA00068 • Hammer • Rubber Mallet • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Dodge Dakota 1997-2004 2nd Generation:    • Dodge Dakota 1997-2004 2nd Generation   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.