Leica GS18T Micro sim configuration using 4g or LTE and Leica CS20 Data Collector: Updated 5 17-21 скачать в хорошем качестве

Leica GS18T Micro sim configuration using 4g or LTE and Leica CS20 Data Collector: Updated 5 17-21

Overview of different APN settings for different vendor sim cards Smartnet-Smart-connect (AT&T) SIM card APN is m2m005125.attz AT&T Direct SIM Card APN is broadband Verizon Direct SIM card APN is vzwinternet T Mobil SIM Card APN fast.t-mobil.com 00:00. Overview Micro sim card to get GS18T on 4g platform if using older cs20 with 3g 01:40. Physically Insert SIM card into GS18T 02:30 GAT27 external modem antenna and port to install (4g) Critical 03:25 Smart connect SIM card thru Leica Smartnet -4G AT&T APN for Smart connect is "m2m005125.attz" if you get your SIM from AT&T Directly use APN "broadband" 04:45 Overview of what is required for Verizon Micro Sim option : LTE 05:45 . Overview to configure the GS18 and CS20-Bluetooth cs20-GS18T 07:00. Switch Work profiles IMAX and NEAR 07:20 Configuration settings for RTK network, server and NTRIP username and password 09:20 Selection of Mountpoints MSM_IMAX & MSM_NEAR 11:15. Configure GS18T modem (GS connections) 13:00. Enter APN for sim card to access internet Smart-connect SIM card APN is m2m005125.attz AT&T Direct SIM Card APN is broadband Verizon Direct SIM card APN is vzwinternet 13:40. Start streaming RTK corrections View 1D and 2D quality and also view GNSS data corrections GPS (US) Glonass (RUS) , Bei Dou (CHN)and Galileo (EUR)- also triple frequency L5 and Alt-Boc 14:45 Switch workstyle from IMAX to NEAR and check settings for NEAR solution via GS18 modem Note#1: It is strongly recommended to back up settings and format the cs20 before setting up the GS18T with new workstyle and micro sim settings. Formatting will start on a fresh slate to ensure the new Connections thru GS18 4g will work . Please refer to other videos on backing up settings, and formatting in the cs20 firmware upload video Note #2: If you are using the GS18T as a Radio rover using the internal Satel radio- when you setup the GS18T Radio setting under Settings-Connections-All Other connections-"GS Connection" tab "GS Internet" please disable the Internet thru GS18- then it will allow you to use the GS Radio device under "RTK Rover" settings. As only one device to the GS18T sensor can be used at a time. This just means when you are running GS18T in UHF radio modem cannot be on internet, thus if using FTP transfer, will just have to switch to the Network workstyle to send/receive via FTP .