Unbrick & Recover Netgear R6700 | Restore or Revert to Stock Firmware скачать в хорошем качестве

Unbrick & Recover Netgear R6700 | Restore or Revert to Stock Firmware

Unbrick, Rescue, Recover or Revert to Stock Netgear r6700 Firmware #1 Download the Stock Netgear firmware for the Netgear R6700 (VERSION 1) router: Webpage: https://kb.netgear.com/000064026/R670... Download Link: https://www.downloads.netgear.com/fil... Close the Web Browser. Double click the zip file copy the ".chk" file to folder where you unzipped NMRPFLASH. #2 Download NMRPFLASH: Create an NMRP folder in your Downloads directory Webpage with files: https://github.com/jclehner/nmrpflash... Link: https://github.com/jclehner/nmrpflash... Go to download folder NMRP. Right click the file click on extract all. Click on extract. #3 Download Npcap "Free Edition": Webpage: https://npcap.com/#download Download link: https://npcap.com/dist/npcap-1.83.exe Go to download folder. Double click the file. Accept the agreement (I Agree). Accept the default configuration. Confirm that there are checkmarks on both: Support raw 802.11 traffic (and monitor mode) for wireless adapters and Install Npcap in WinPcap API-compatible Mode. Click Install. Click Finish to Finish the installation. #4 Turn off WIFI make sure you are only connected directly to the router and no other network Disconnect the PC from all other networks. Connect router and PC to each other with an Ethernet cable. #5 Type cmd in the windows search box. Command Prompt should pop up. Choose Run as administrator. Say yes to the pop up window. #6 Go to the folder where you extracted nmrpflash and click on the folder address bar then right click and copy the file path. Go to the CMD window (click on it). Type cd and a space. Right click the mouse on inside the window. In my case it looks like this (cd C:\Users\xyz\Downloads\NMRP) Press enter. Type dir and press enter. Verify that you can see the NMRPFLASH program and the R6700-V1.0.2.26_10.0.61.chk are listed. #7 Type nmrpflash in the command window and press enter to see all the switches for the program plus a sample command string. #8 Type ipconfig and press enter. Note the ip address of your Ethernet adapter (192.168.XXX.XXX) #9 Type nmrpflash -L (note which adapter has your IP address) (my case, net16) #10 Copy the example flash command (nmrpflash.exe -i net0 -f firmware.bin) edit the net0 to your net address (my case net16) add -t 55555 after your net# Here is what mine would look like (nmrpflash.exe -i net16 -t 55555 -f ) #11 Add a space after the (-f) and copy the file name of your firmware flash file into the command prompt window. Right click the file from the folder where you stored it. Choose rename. Right click the file name again choose select all. Right click the file name again choose copy. My command would look like this: nmrpflash.exe -i net16 -t 55555 -f R6700-V1.0.2.26_10.0.61.chk Press enter and power up the router. When you see: Remote finished. Closing connection. Reboot your device now. Power your router down and power your router back up again. Go to 192.168.1.1 You see the stock netgear firmware's set up page. #12 Turn the WIFI back on. Return the Network to the state it was in before you started. Enjoy your router in it's stock state. Creating the Flash Batch file Open Notepad (search for notepad) Type in Notepad cd and a space. Copy the path of your extracted NMRP program from your command prompt window. DO NOT INCLUDE THE GREATER THAN SYMBOL AT THE END Right click and paste the command into Notepad. In my case I see,: cd C:\Users\xyz\Downloads\NMRPFLASH
mrpflash-0.9.25-win32 Add a back slash on the end of the command (\). Mine now would look like this: cd C:\Users\xyz\Downloads\NMRPFLASH
mrpflash-0.9.25-win32\ Go back to the command window. Use your up arrow key to get the mnrpflash command we used to flash the router. In my case: nmrpflash.exe -i net16 -t 55555 -f R6700-V1.0.2.26_10.0.61.chk Highlight the entire command and right click on it. Paste it into your note pad on a new line. In my case I would see this in Notepad: nmrpflash.exe -i net16 -t 55555 -f R6700-V1.0.2.26_10.0.61.chk My entire batch file will now look like this: cd C:\Users\xyz\Downloads\NMRPFLASH
mrpflash-0.9.25-win32\ nmrpflash.exe -i net16 -t 55555 -f R6700-V1.0.2.26_10.0.61.chk Go to File on the Notepad menu bar and save the file as "YourFileNameHere".bat file You may also want to copy the file as a .txt file too. My example Netgear R6700 rescue.bat The .bat file can be edited by right cliking the file and choosing edit. Save the file in conveniet location Right click the file and Run as administrator Power on your router. Unbrick & Recover Netgear R6700 | Restore or Revert to Stock Firmware