DIY How to install muffler on a type 1 VW engine - highlights the install of J-tubes. скачать в хорошем качестве

DIY How to install muffler on a type 1 VW engine - highlights the install of J-tubes.

How to install an exhaust on a type 1 VW engine. [muffler and j-tubes(heat exchangers)] This video highlights the install of an after market muffler and J-tubes. Heat exchangers are very similar to J-tubes. Steps: 1)Prepare & Plan -Get everything you are going to need -have a clean dry area (if possible) -purchase the parts needed; Gaskets, exhaust clamps, new nuts and washers, hoses from exhaust to fan shroud, new muffler and anti-seize. 2)inspect the components -be sure that the studs on the heads are is good quality. -how are the heat exchangers. 3)get tools together -10mm box end wrench 2 each -13mm box end wrench. -prybar – small maybe large -channel locks -Philips head screwdriver one that will fit in the 10mm bolt hole. 4)remove the muffler and j-tubes or heat exchangers. Be sure to apply WD-40 or other rust eater to break down the rust on the exhaust studs. I would advise you to apply this a day or two prior to the muffler work. The heat that come off the heads really helps with this rust build up. 5)install the j-tubes or heat exchangers. Remember to install loose until all components are on the engine. 6)install the muffler. 7)Be sure to tighten everything up to be sure there are no air of exhaust leaks. 8)I recommend checking other things. Fuel filter, fuel hoses, oil, heat return hoses from the exhaust to fan shroud. When was your last valve adjustment?? – See my video on valve adjustment. Take your time. Remember to be patient Do it right the first time. Thank you for watching. I hope your VW is working good. Let me know what I can help you with. Have a great day! -Michael