У нас вы можете посмотреть бесплатно Vaculex lift tube repair или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
You need to remove all of the tape. Don’t use a hose clamp, it is not needed. A bunch of tape is not required. Wrapping the tape around the finished product TWICE is sufficient. More tape does not equal a better job. The key to cutting the lift tube is angling the blade as shown in the diagram. It is essential. The other tip is to use a professional wire cutter or bolt cutter to cut the wire. DON’T USE SIDE CUTTERS or some other crappy cutting instrument. Use something that will cut the wire first try. If you don’t have the right tool BUY ONE. This is what I use: https://www.bunnings.com.au/trojan-20... More helpful tips: Follow the instructions carefully! Screwing the black plastic adaptor into the lift tube can be tricky. Pay attention to the video where they show you how to remove excess material. If you are struggling to get it started, turn the piece counter-clockwise until the threads drop into the groove. Do not screw the adaptor in further than needed. The lift tube material should stop 10mm short of the end of the black plastic adaptor.