Lecture 6 What are Network Devices скачать в хорошем качестве

Lecture 6 What are Network Devices

Network devices Hubs connect multiple computer networking devices together. A hub also acts as a repeater in that it amplifies signals that deteriorate after traveling long distances over connecting cables. A hub is the simplest in the family of network connecting devices because it connects LAN components with identical protocols. A hub can be used with both digital and analog data, provided its settings have been configured to prepare for the formatting of the incoming data. For example, if the incoming data is in digital format, the hub must pass it on as packets; however, if the incoming data is analog, then the hub passes it on in signal form. Hubs do not perform packet filtering or addressing functions; they just send data packets to all connected devices. Hubs operate at the Physical layer of the Open Systems Interconnection (OSI) model. There are two types of hubs: simple and multiple port. Switch Switches generally have a more intelligent role than hubs. A switch is a multiport device that improves network efficiency. The switch maintains limited routing information about nodes in the internal network, and it allows connections to systems like hubs or routers. Strands of LANs are usually connected using switches. Generally, switches can read the hardware addresses of incoming packets to transmit them to the appropriate destination. Using switches improves network efficiency over hubs or routers because of the virtual circuit capability. Switches also improve network security because the virtual circuits are more difficult to examine with network monitors. You can think of a switch as a device that has some of the best capabilities of routers and hubs combined. A switch can work at either the Data Link layer or the Network layer of the OSI model. A multilayer switch is one that can operate at both layers, which means that it can operate as both a switch and a router. A multilayer switch is a high-performance device that supports the same routing protocols as routers. Switches can be subject to distributed denial of service (DDoS) attacks; flood guards are used to prevent malicious traffic from bringing the switch to a halt. Switch port security is important so be sure to secure switches: Disable all unused ports and use DHCP snooping, ARP inspection and MAC address filtering. Routers help transmit packets to their destinations by charting a path through the sea of interconnected networking devices using different network topologies. Routers are intelligent devices, and they store information about the networks they’re connected to. Most routers can be configured to operate as packet-filtering firewalls and use access control lists (ACLs). Routers, in conjunction with a channel service unit/data service unit (CSU/DSU), are also used to translate from LAN framing to WAN framing. This is needed because LANs and WANs use different network protocols. Such routers are known as border routers. They serve as the outside connection of a LAN to a WAN, and they operate at the border of your network. Router are also used to divide internal networks into two or more subnetworks. Routers can also be connected internally to other routers, creating zones that operate independently. Routers establish communication by maintaining tables about destinations and local connections. A router contains information about the systems connected to it and where to send requests if the destination isn’t known. Routers usually communicate routing and other information using one of three standard protocols: Routing Information Protocol (RIP), Border Gateway Protocol (BGP) or Open Shortest Path First (OSPF). Routers are your first line of defense, and they must be configured to pass only traffic that is authorized by network administrators. The routes themselves can be configured as static or dynamic. If they are static, they can only be configured manually and stay that way until changed. If they are dynamic, they learn of other routers around them and use information about those routers to build their routing tables. Routers are general-purpose devices that interconnect two or more heterogeneous networks. They are usually dedicated to special-purpose computers, with separate input and output network interfaces for each connected network. Now Get Free Video Courses, E-Books, Event Updates & Class Notes Anywhere Anytime LEARN ANYWHERE WITH A2IT IOS AND ANDROID APP https://a2itsoft.com/free-app Free Download Educational App with Step-by-Step Guide To Learn or Teach in Smarter Way our Websites: https://www.a2itonline.com   / a2itonline