У нас вы можете посмотреть бесплатно Roughing on My Large Lathe или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Please see • Horizontal Milling Machine Work 2 for heavy milling in my shop Using my large lathe to rough out a piece of mild steel for a weld fixture for the clamshell bucket repair. If you would like to just see the heavy (possibly Abom sized?) cuts skip ahead to the 8:30 mark. The roughing passes were .250" deep at a .020" per rev feed rate at 557 sfpm. Giving a metal removal rate of 33.4 cubic inches per minute. At the beginning I show how I like to set up the 4 jaw chuck before placing the material in it. I try to set the jaws just a bit larger than the stock size and have them run concentric. The concentric lines machined in the chuck face help greatly with this prep work. I also show how I move heavier pieces around my shop using a combination of forklift and gantry crane. At the end I was pleasantly surprised by the accuracy of this worn out lathe. Thanks for watching.