PianoDisc: Low Profile Installation скачать в хорошем качестве

PianoDisc: Low Profile Installation

Full-length video of PianoDisc's Low Profile Installation Instructions Download the PDF instructions: http://bit.ly/RuOvkp Jump to specific chapters by clicking the times below: 00:07:45 - 02 - Remove the keybed 00:15:42 - 03 - Measure for key access 00:26:15 - 04 - Measuring for keyframe cut 00:31:00 - 05 - Create backrail bead on keyframe if required 00:32:48 - 06 - Cut the keyframe 00:34:50 - 07 - Mark the location for the solenoid slot 00:41:38 - 08 - Prepare to cut the solenoid slot 00:42:59 - 09 - Cut the solenoid slot 00:47:50 - 10 - Reinforce the keybed 00:48:39 - 11 - Cut leg tops to clear the solenoid slot 00:51:25 - 12 - Assemble the tray, solenoid rails, and guide solenoids. 00:55:48 - 13 - Installing the trapwork 01:23:06 - 14 - Adjusting the key solenoid plungers 01:25:49 - 15 - Install key solenoids 01:28:56 - 16 - Assemble driver boards to the solenoid tray 01:31:34 - 17 - Setup for burn in 01:33:27 - 18 - Burn in the unit 01:33:53 - 19 - Install driver boards into the tray assembly 01:36:54 - 20 - Drill hole in the belly rail for wires 01:37:47 - 21 - Mount the CPU 01:38:27 - 22 - Mount the power supply 01:40:10 - 23 - Mount the power strip 01:41:48 - 24 - Installing keybed to the piano 01:42:32 - 26 - Set the height of the adjustable plungers 01:45:08 - 27 - Set up communication with the PianoDisc system 01:46:17 - 28 - Adjust the pedal solenoid 01:51:21 - 29 - Final check list 01:52:38 - 30 - Ground strap installation 01:53:42 - Addendum 1 - Steinway sostenuto 01:57:20 - Addendum 2 - Keyframe modifications / Shift lever 01:57:38 - Addendum 3 - Clearance for end plates