Canon ir3045, ir3225 fixing unit repair E000, E001 E002 E003 tiwari скачать в хорошем качестве

Canon ir3045, ir3225 fixing unit repair E000, E001 E002 E003 tiwari

E code Description Category Remarks E000 The fixing temperature does not go up after turning ON the power due to a fault in the thermistor or the heater, etc., E001 The fixing temperature abnormally goes up due to a fault in the thermistor or SSR, etc. E002 The fixing temperature does not reach a specific temperature due to a fault in the thermistor or the heater, etc. e.g) The fixing temperature does not go up to 190 C degrees within 5 min after reaching 70 C degrees. E003 The fixing temperature drops abnormally after wait time is up due to a fault in the thermistor, the heater, etc. e.g.) After wait time is up, the fixing temperature drops to 70 C degrees. E004 A short circuit in the fixing heater drive circuit (SSR, etc) is detected. E005 The fixing web is wound up completely. E006 The fixing drawer connector is not connected as the front door is closed. E007 The fixing film is off to the side. E008 A specific number of copies are made after the machine detects that fixing oil is out. Since a user cannot re-supply fixing oil, the error code is indicated. E009 The rated voltage of the power supply and that of the fixing unit do not match Tiwari Canon photo copier technology solution services in kalyan. we are provide to commercial residential as well as industrial sector canon photo copier black and white and color machine. i love my business so i'm always present for my business partner and my machine. My business partner also so special because they do his work very clearly and strongly way. Thank you to all people and google and YouTube and Facebook and google business all related things. Thanks like ❤ share 👭👭 and Suscribe my channel E code Description Category Remarks E000 The fixing temperature does not go up after turning ON the power due to a fault in the thermistor or the heater, etc., E001 The fixing temperature abnormally goes up due to a fault in the thermistor or SSR, etc. E002 The fixing temperature does not reach a specific temperature due to a fault in the thermistor or the heater, etc. e.g) The fixing temperature does not go up to 190 C degrees within 5 min after reaching 70 C degrees. E003 The fixing temperature drops abnormally after wait time is up due to a fault in the thermistor, the heater, etc. e.g.) After wait time is up, the fixing temperature drops to 70 C degrees. E004 A short circuit in the fixing heater drive circuit (SSR, etc) is detected. E005 The fixing web is wound up completely. E006 The fixing drawer connector is not connected as the front door is closed. E007 The fixing film is off to the side. E008 A specific number of copies are made after the machine detects that fixing oil is out. Since a user cannot re-supply fixing oil, the error code is indicated. E009 The rated voltage of the power supply and that of the fixing unit do not match. E010 Clock pulses fail to be generated or the PLL lock fails to be released due to a fault in the main motor, etc. E011 Excess current flows to the motor control circuit because the main motor is locked up, etc. E012 Clock pulses fail to be generated or the PLL lock is released due to a fault in the drum motor, etc. In case the drum drive motor exists in addition to the main motor, this code refers to an error of a motor which drives mainly other units than the drum. E013 •The PLL lock is released because waste toner motor is locked up, etc. •The micro switch employed to detect clogging of waste toner is activated. •The waste toner case is detected full. E014 •The PLL lock of the fixing/feeding motor is released. •Excess current of the feeding motor is detected. E015 •Clock pulses of the pick-up/duplexing/developing motor fails to be generated or be detected. •Excess current of the pick-up/duplexing/developing motor is detected. E016 Excess current of the reciprocating motor of the photosensitive drum cleaner unit is detected. E017 The PLL lock of the drive motor of the holding tray unit is released. E018 The PLL lock of the drive motor of the oil removing roller is released. E019 The waste toner case is detected full although it is not. E020 The developer fails to be replenished with starter developer properly. A hopper motor error is identified by the detail code of E020. However, it may be identified by E02x according to need. E061 Specific potential is not be required or the limiter is activated as the potential is controlled. E062 The photosensitive drum temperature does not reach a specific value due to a fault in the photosensitive drum heater, etc. E063 The home position of the transfer corona wire cleaner cannot be detected. An error code is not to be E091 A failure in the detection of the document feed sensor. E100 The BD signal cannot be detected within a specific time. E110 The polygonal scanner motor does not reach a specific speed within a specific time.