How To Make A PVC Violin Part 1 of 3 скачать в хорошем качестве

How To Make A PVC Violin Part 1 of 3

Hello and welcome to part 1 of my 3 part video series on how to make a pvc pipe violin. Before you start building I'd suggest that you watch all three videos and read the parts and tool list and have a very good understanding about what your going to do- also don't be afraid to try things differently then I did in the video because that's the fun part about this stuff coming up with new creative ideas and things. Parts: (Sorry if I missed something in these lists) Set of tuning pegs and an end pin. 5.5" x 1" piece of pipe for the chin rest 12" x 1" piece of pipe for the finger board 2" x 1" piece of pipe for the bridge 5" x 1" piece of pipe for the tail piece 2.5' x .5" piece of pipe for the neck 3.5-4" x .5" two pieces of pipe for the body .5" tee for the body .5" two caps for the body 2" screws two of them for mounting shin rest 50lb test fishing line for strings 30lb test fishing line for strings 15lb test fishing line for strings 8lb test fishing line for strings Optional Set of violin strings. Always Buy 10' Sticks of pipe because you will want to experiment and sometimes you run into problems. Tools: (Sorry if I missed something in these lists) Stove for bending the neck and body Toaster Oven for bending the tail piece, chinrest, finger board, and bridge. Drill 1/8" Drill Bit 5/16" Drill Bit Philips Head Screw Driver PVC Pipe Cutter Dermal Tool and Cut Off Wheel Coping Saw Files Vice Rubber Mallet Fine Point Sharpie Marker Tape Measure Warning- this can be hazardous, takes tons of patients, gets frustrating at times, and can be exhausting. Also that this takes time it's not something you can do in one day. Well I hope you enjoyed the videos and that they were inspirational thanks for watching please subscribe and have fun building and playing musical instruments!!!